Table of Contents
Advertisement
4. When [Check Now...] is clicked in the Error-checking, the HDD check
option dialog box shown in Fig. 4 is opened.
When a check has been entered for the check disk option, click it to
release (cancel) the check.
When the check status is displayed after checking "Start" button and the
check is completed, the dialog box signaling completion shown in Fig. 5
appears. Click [OK].
5. The properties tool dialog box screen shown in Fig. 3 now returns. Click
[Cancel] to exit the tool.
¬ When the checks on "C:" and "D:" of disk 0 reveal an error
or problem ¬
O There is a possibility that the system disk is destroyed.
– 48 –
Fig. 4 HDD check option dialog box
Fig. 5 Dialog box signaling completion
Advertisement
Chapters
Table of Contents
