Panasonic AJ-DE97P Installation Manual page 37

(4) SCSI card name and (5) SCSI disk drive names (for 5 units)
The figure below shows the screen which displays the BIOS installation of the
SCSI card (ASC-39160) inserted into the PCI slot and the information for the
five SCSI disk drives connected to the SCSI card.
Normally, information for all five drives is displayed as shown in the figure.
Initialize Plug and Play Cards...
PNP Init Completed
Detecting Primary Master.... IBM-DTLA-307030
Detecting Primary Slave..... MATSHITA
Adaptec SCSI Card 39160
(c) 1997 Adaptec, Inc. All Rights Reserved.
222 Press <Ctrl><A> for SCSISelect(TM) Utility! 111
Ch A, SCSI ID: 1 IBM
SCSI ID: 2 IBM
Ch B, SCSI ID: 0 IBM
SCSI ID: 1 IBM
SCSI ID: 2 IBM
The SCSI ID for Ch A and Ch B must appear in order as
1 and 2 and 0 to 2, respectively.
The SCSI channels must appear as Ch A and Ch B.
Two disc drive displays must appear for Ch A and three for Ch B.
– 37 –
The SCSI card name must include
"39160".
SCSI BIOS vX.XX
DDYS-T18350M
DDYS-T18350M
DDYS-T18350M
DDYS-T18350M
DDYS-T18350M
The disk drive names must appear for each SCSI
ID without fail.
CR-585
160 - Hard Disk0
160 - Hard Disk1
160 - Hard Disk2
160 - Hard Disk3
160 - Hard Disk4
"160" must appear as the
SCSI bus speed.