B-3. How To Use Scsi-Bios Tool - Panasonic AJ-DE97P Installation Manual

B-3. How to use SCSI-BIOS Tool

(1) Checking the SCSI device configuration
1. Press the [:] or [;] arrow key to highlight the SCSI channel to be
checked, and then press the [Enter] key to select the channel.
(Press the [Esc] key to return to the previous menu.)
2. The selection screen shown below now appears. Press the [:] or [;]
arrow key to highlight the [Configure/View Host Adapter Settings] item, and
press the [Enter] key.
(Press the [Esc] key to return to the previous menu.)
3. The selection screen shown below now appears. Press the [:] or [;]
arrow key to highlight the [SCSI Device Configuration] item, and press the
[Enter] key.
(Press the [Esc] key to return to the previous menu.)
Configuration
SCSI Channel Interface Definitions
Host Adapter SCSI ID................. 7
SCSI Parity Checking................. Enable
Host Adapter SCSI Termination........ Automatic
Additional Options
Boot Device Options.................. Press<Enter>
SCSI Device Configuration............ Press<Enter>
Advanced Configuration Options....... Press<Enter>
4. The parameters for SCSI devices #0 to #15 now appear. Check that the
parameters of all the devices are set as shown below.
(Press the [Esc] key to return to the previous menu.)
SCSI Device ID
Sync Transfer Rate(MB/sec).... 160
Initiate Wide Negotiation..... yes
Enable Disconnection.......... yes
Send Start Unit Command....... yes
Options Listed Below Have NO EFFECT if the BIOS is Disabled
Enable Write Back Cache....... N/C
BIOS Multiple LUN Support..... no
Include in BIOS Scan.......... yes
Options
Configure/View Host Adapter Settings
SCSI Disk Utilities
SCSI Device Configuration
- 40 -
#0 #1 -------
160 -------
yes -------
yes -------
yes -------
N/C -------
no -------
yes -------
#15
160
yes
yes
yes
N/C
no
yes