Advertisement
Mounting and Removing Flat Panel Screen
Hook adapter brackets (BB) onto wall plate (AA). Then slowly swing screen in as shown. Turn screws clockwise using
3
4 mm allen wrench (EE) at least six times to prevent screen from being removed as shown in detail 1.
Screen can be adjusted horizontally if desired.
Note: To lock the screen down, tighten screw to wall plate as shown in detail 1.
To remove screen from mount, loosen safety screws, swing screen away from mount, and lift screen off of mount.
WARNING
• Always use an assistant or mechanical lifting equipment to safely lift and position the screen.
BB
AA
AA
SCREW
BB
DETAIL 1
8 of 9
ISSUED: 02-08-06 SHEET #: 202-9092-1
Advertisement
