Technical Support Options - Wacom DTU-1931 Installation Manual & User Manual

TECHNICAL SUPPORT OPTIONS

If you have a problem with your DTU-1931 pen display, first check the appropriate Installation
section in this guide to make sure the unit is installed correctly. Then review the Troubleshooting
procedures.
If you cannot find the answer in this guide, you may find updated information about your problem in
the appropriate Read Me file for your platform (located on the Installation CD).
You can also check the product FAQs (Frequently Asked Questions) on the Wacom web site for
your region.
If you have an Internet connection you can download the latest software drivers from the Wacom
web site for your region. See Obtaining driver downloads on page 38.
If you cannot solve the problem and you think your Wacom product is not working properly, contact
the Wacom support staff for the area where your product was purchased. See the Wacom tablet
Read Me file, located on the Installation CD, for contact information.
When you call, you should be at your computer with the following information available:
•
This manual.
•
Pen display serial number. (Look at the label on the back of the unit.)
•
Driver version number. (See the Installation CD or click on the Wacom Tablet control panel
About button.)
•
The make and model of your computer, and operating system version number.
•
The make, model, and connection type of your video card.
•
A list of peripheral devices attached to your computer.
•
The software application and version you were using when the problem occurred.
•
The exact wording of any error message that appeared on your screen.
•
What happened and what you were doing when the problem occurred.
•
How you tried to solve the problem.
Troubleshooting
Page 37