Appendix; Caring For The Dtf-720; Cleaning - Wacom DTF-720 Installation Manual & User Manual

Interactive pen display
Table of Contents

Advertisement

Available languages

Available languages

CARING FOR THE DTF-720

Keep the pen and the DTF-720 LCD screen surface clean. Dust and dirt particles can stick to the pen
and cause excessive wear to the display screen surface. Regular cleaning will help prolong the life of
your LCD screen surface and pen. Keep the DTF-720 and the pen in a clean, dry place and avoid
extremes in temperature. Room temperature is best. The DTF-720 and pen are not made to come
apart. Taking apart the product will void your warranty.
Important: Take care to never spill liquids onto the pen display or pen. Be especially careful of
getting the display, or pen buttons and tip wet – they contain sensitive electronic parts that will
fail if liquids enter them.

CLEANING

To clean the DTF-720 casing or the pen, use a soft, damp cloth; you can also dampen the cloth using a
very mild soap diluted with water. Do not use paint thinner, benzine, alcohol, or other solvents to clean
the unit casing or pen.
To clean the display screen, use an anti-static cloth or a slightly damp cloth. When cleaning, apply only
a light amount of pressure to the display screen and do not make the surface wet. Do not use detergent
to clean the display screen; this may damage the coating on the screen. Please note that damage of
this kind is not covered by the manufacturer's warranty.

Appendix

Page 44
APPENDIX

Advertisement

Table of Contents
loading

Table of Contents