Trane Starters Engineering Bulletin page 30

Low-Voltage Starter Types
Environmental specification
•
•
•
•
•
Dimensions
Table 6
and use theTrane submittals for actual dimensions.
Table 6. Remote AFD dimensions
460 Vac
Frame Power (hp)
D3/D4 150–350
E2 450–600
N/A
F3 650–750
950–1050
F4 1150–1350
Digital data display
The following points are digitally displayed at the chiller controller:
•
•
•
Harmonics
The remote AFD is a standard six pulse design.Therefore the harmonic level is ~35 percent total
demand distortionTDD as measured at the AFD input. If lower levels of attenuation are required,
upstream filtering would be required.
30
Operating temperature: 32°F to 104°F (0°C to 40°C).
Storage temperature: -4°F to 149°F (-20°C to 65°C).
Humidity: 95 percent non-condensing.
Maximum elevation: 3280 ft (1000 m) rated output current.
Derate 4 percent/3280 ft over rated altitudes up to 9840 ft (3000 m).
provides some basic reference dimensions and weights for the remote AFD. Always refer
575 Vac
Max. Amps Power (hp)
394 150–400
649 450
N/A 500–650
791 750–1050
1031 N/A
1360 1150–1550
Frequency command
Input line voltage
Load-side amps
Max. Amps Width (in.)
356 48
400 56
560 64
840 127
N/A 127
1258 150
Depth (in.) Height (in.) Weight (lb)
24 86
24 90
24 90
24 90
24 90
24 90
CTV-PRB004-EN
1220
1635
1680
2885
3185
3720