TP-Link TL-SG2216 User Manual page 99

The following entries are displayed on this screen:
DSCP Priority Config
DSCP Priority:
Priority Level
DSCP:
Priority:
Configuration Procedure:
Step Operation
1 Configure
relation between the DSCP
priority and 802.1P priority
1 Configure
relation between the 802.1P
priority and TC
2 Select a schedule mode
Figure 9-9 DSCP Priority
Select Enable or Disable DSCP Priority.
Indicates the priority determined by the DS region of IP
datagram. It ranges from 0 to 63.
Indicates the 802.1P priority the packets with tag are mapped to.
The priorities are labeled as CoS0 ~ CoS7.
Description
the mapping Required. On QoS→DiffServ→DSCP Priority page,
enable DSCP Priority and configure the mapping
relation between the DSCP priority and 802.1P priority.
the mapping Required. On QoS→DiffServ→802.1P Priority page,
configure the mapping relation between the 802.1P
priority and TC.
Required.
page, select a schedule mode.
On QoS→DiffServ→Schedule
92
Mode