TP-Link TL-SG2216 User Manual page 90

function on the switch.
Choose the menu Multicast→Multicast Filter→Port Filter to load the following page.
The following entries are displayed on this screen:
Port Filter Config
Port Select:
Select:
Port:
Filter:
Action Mode:
Bound IP-Range (ID):
Max Groups:
Figure 8-11 Port Filter
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for multicast filtering. It is multi-optional.
Displays the port number.
Select Enable/Disable multicast filtering feature on the port.
Select the action mode to process multicast packets when the
multicast IP is in the filtering IP-range.
Permit: Only the multicast packets whose multicast IP is in
the IP-range will be processed.
Deny: Only the multicast packets whose multicast IP is not
in the IP-range will be processed.
Enter the IP-rang ID the port will be bound to.
Specify the maximum number of multicast groups to prevent
some ports taking up too much bandwidth.
83