TP-Link TL-SG2216 User Manual page 11

Chapter
Chapter 9 QoS
Chapter 10 SNMP
Chapter 11 Maintenance
Appendix A Specifications
Appendix B Configure the PCs
Appendix C Glossary
Introduction
This module is used to configure QoS function to provide
different quality of service for various network applications and
requirements. Here mainly introduces:
DiffServ: Configure priorities, port priority, 802.1P priority and
DSCP priority.
Bandwidth Control: Configure rate limit feature to control the
traffic rate on each port; configure storm control feature to
filter broadcast, multicast and UL frame in the network.
This module is used to configure SNMP function to provide a
management frame to monitor and maintain the network
devices. Here mainly introduces:
SNMP Config: Configure global settings of SNMP function.
Notification: Configure
management station to monitor and process the events.
RMON: Configure RMON function to monitor network more
efficiently.
This module is used to assemble the commonly used system
tools to manage the switch. Here mainly introduces:
System Monitor: Monitor the memory and CPU of the switch.
Log: View configuration parameters on the switch.
Device Diagnose: Test the connection status of the cable
connected to the switch, test if the port of the switch and the
connected device are available.
Network Diagnose: Test if the destination is reachable and
the account of router hops from the switch to the destination.
Lists the hardware specifications of the switch.
Introduces how to configure the PCs.
Lists the glossary used in this manual.
4
notification function
Return to CONTENTS
for the