TP-Link TL-WR841N User Manual page 51

TL-WR841N/TL-WR841ND 300Mbps Wireless N Router
Figure 4-17 Wireless Security
Disable Security - If you do not want to use wireless security, check this radio button. But it's
strongly recommended to choose one of the following modes to enable security.
WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as show in Figure 4-18.
Figure 4-18
• Type - you can choose the type for the WEP security on the drop-down list. The default
setting is Automatic, which can select Shared Key or Open System authentication type
- 43 -