TP-Link TL-WR841N User Manual page 34

Note:
The default PIN code of the Router can be found in its label or the QSS configuration screen as
Figure 4-2.
c). You will see the following screen when the new device successfully connected to the
network.
Note:
1) The QSS LED on the Router will light green for five minutes if the device has been
successfully added to the network.
2) The QSS function cannot be configured if the Wireless Function of the Router is disabled.
Please make sure the Wireless Function is enabled before configuring the QSS.
TL-WR841N/TL-WR841ND
The QSS Configuration Screen of Wireless Adapter
300Mbps Wireless N Router
- 26 -