Port Status - TP-Link TL-R480T+ User Manual

Port - Here displays the Router's LAN Ports.
Port Status - There are two statuses- Enabled, Disabled. Enabled (default status) means the
ports can be used; Disabled means the ports can't be used.
Flow Control - There are two options- Enabled, Disabled. Enabled means the Flow Control
function is adopted; Disabled means the function isn't adopted.
Negotiation Mode - You can select Auto Negotiation, 10M Half Duplex, 10M Full Duplex,
100M Half Duplex, 100M Full Duplex for the negotiation.

4.12.5 Port Status

Choose menu "Switch Settings→Port Status", you can view the status of the LAN port in the
next screen (shown in Figure 4-66).
Port - This displays the Router's LAN ports.
Port Status - This displays the port's current connection status.
Connect Speed (Mbps) - This displays the port's current connection speed.
Duplex Mode - This displays which duplex mode the ports adopt to communicate, Full
Duplex or Half Duplex.
Flow Control - This displays whether the corresponding port adopt Flow Control function.
Enable means the function is adopted, Disable means the function is not adopted.
TL-R480T+ Load Balance Broadband Router User Guide
Figure 4-65
Figure 4-66
71