Contents - Echo PB-460LN Operator's Manual

8
1. AIR CLEANER - Contains replaceable air fi lter element.
2. SPARK PLUG - Provides spark to ignite fuel mixture. Spark plug is located under the cover on LN models.
3. SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER WITH CATALYST - The muffl er or
catalytic muffl er controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of
carbon from leaving the muffl er. Keep exhaust area clear of fl ammable debris.
4. RECOIL STARTER HANDLE - Pull recoil handle slowly until starter engages, then quickly and fi rmly. When
engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.
5. PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from
the carburetor. Pump purge bulb until fuel is visible and fl ows freely in the clear fuel tank return line. Pump purge
bulb an additional 4 or 5 times.
6. CHOKE - Move lever up to Cold Start (
Run position (
7. FUEL TANK CAP - Covers and seals fuel tank.
8. BLOWER PIPES - Twist lock design.
9. THROTTLE POSITION LEVER/STOP SWITCH - Combination stop switch and variable speed throttle lever.
When the lever is moved all the way forward the blower is at Wide Open Throttle (W.O.T.). When the lever is
moved rearward to detent, the blower is at idle. When the lever is moved rearward past the idle detent the blower
will stop.
10. SAFETY DECAL - Lists important safety precautions.
11. THROTTLE HANDLE - Rotates downward for throttle control access. Spring loaded for fl exible operation.
12. SHOULDER HARNESS - Supports unit on operator's back. Pull down on loose ends of straps to position unit for
comfortable operation. Loosen straps to remove the unit.
13. FLEXIBLE PIPE - Allows for full range of movement.
14. STICK HANDLE - Provides comfortable grip for directing air fl ow.
C
ONTENTS
___ 1 - Power Head
___ 1 - Flex Pipe
___ 1 - Pipe with Swivel
___ 1 - Straight Pipe
___ 1 - Curved Pipe
___ 1 - Operator's Manual
___ 1 - Warranty Registration Card
___ 1 - Emission Control Warranty Statement
___ 2 - Clamps w/screws
___ 1 - Stick Handle Assembly
).
) starting position and for emergency stopping. Move lever down to