Contents; Assembly; Install Blower Pipes - Echo PB-620ST Operator's Manual

C
ontents
____ 1 - Power Head
____ 1 - Flex Pipe
____ 1 - Pipe w/swivel
____ 1 - Straight Pipe
____ 1 - Straight Pipe w/decal
____ 1 - Operator's Manual
____ 1 - Warranty Registration Card
____ 1 - Plastic Bag
____ 2 - Clamps w/screws
____ 1 - Guide Loop
a
ssembly
WARNING
Never perform maintenance or assembly procedures with engine
running or serious personal injury may result.

Install blower pIpes

1. Place guide loop (G) across elbow clamp, and turn until clips fully
engage clamp band.
2. Assemble clamps (A) onto both ends of flexible pipe (B).
NOTE
Clamp with cable guide loop (G) fits elbow end of flexible pipe.
3. Assemble swivel pipe (C) into flexible pipe (B).
NOTE
Assure throttle cable is not twisted before installing handle (E).
4. Position cable between the elbow (D) and frame and along the top
of the flexible pipe. Loosen knob (H) on handle (E). Align notch in
handle with tabs (F). Install onto swivel pipe (C) past long ridges
in pipe.
P B
ower lower
o ' M
Perator s anual
G
G B
A
B
D
C
9
G
A
E
F
H