Echo SRM-265T Operator's Manual page 12

12
TO USE
THESE BLADES
Handle
You
must
Debris Shield
install
Harness
these
parts!
Blade
Mounting
Hardware
* WARNING! DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS
** Arbor diameter of Upper Blade Plate must match arbor diameter of metal blades.
*** New cotter pin required each time blade is installed.
**** Brushcutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness
Grass/Weed Blades Require:
Install Blade Conversion Kit, Includes metal shield (A),
barrier bar (B), and shoulder harness (C).
NOTE
The Barrier Bar is used to restrict rearward movement
of the unit. The Barrier Bar is NOT A HANDLE and
should not be gripped when using or carrying the unit.
Brush/Clearing Blades Require:
Install U-Handle / Blade Conversion Kit, Includes
metal shield (A), shoulder harness with hip pad (C),
and U-Handles (D).
SRM/PAS/SB BLADE SET-UP GUIDE*
Pro Maxi-Cut Rigid Plastic
Grass/Weed
Plastic Cutters Grass/Weed Blade
Loop Handle
Loop Handle, w/or
w/Barrier Bar,
w/o Barrier Bar
or U-Handle
Metal Shield Metal Shield
Shoulder Harness Shoulder Harness
Upper Plate & Upper Plate
Flat Washer & Glide Cup
Hex Nut
New Cotter Pin*** New Cotter Pin***
Metal
Tri-Cut Tri-Cut/8 Tooth
Grass/Weed Blade
Loop Handle
w/Barrier Bar,
or U-Handle
Metal Shield
Shoulder Harness
Upper/Lower
Blade Plates**
Hex Nut Hex Nut
New Cotter Pin***
A
B
C
A
Metal 80T Brush Blade
Metal 22T Clearing Saw Blade
U-Handle
Metal Shield
Shoulder Harness****
Upper/Lower
Blade Plates**
Hex Nut
New Cotter Pin***
D
C