EAW CF-1LZ Installation Manual page 10

Mounting the loudspeaker onto a bracket:
a. Once the clip-fit bracket has been wired and secured to the wall, press the
loudspeaker onto the input connector, until it clicks into place.
Make sure it is fitted on correctly. It is possible to fit it on upside-down, but it will not
click in place, or be securely held on the bracket, or make an electrical connection.
Adjusting the loudspeaker angle:
The adjustment and locking mechanism has been designed to be easy to use.
a. Rotate the locking wheel until the loudspeaker can be rotated horizontally and
vertically. Find the desired loudspeaker position, and then rotate the locking wheel
until it locks this position.
b. Perform a listening test to verify that the coverage is acceptable.
Unmounting the loudspeaker from the bracket:
a. Slide the red plastic tab towards the center of the loudspeaker, and hold while you
press the red center button inwards. Pull the SMS1990 off the bracket.
10
– CF-1LZ/CF-1TX
Lock
Lock/unlock wheel
Unlock
1. Slide this spring-loaded tab to
the left.
2. Press this button in.