To Disable A Rke Transmitter Linked To Memory - Dodge Ram Truck Owner's Manual

• Not all motors may be moved at one time. Refer to the
"Seats/Eight-Way Power Seat" in this section for fur-
ther information.
To recall the memory settings for driver one, press
MEMORY button number 1 on the driver's seat or the
UNLOCK button on the RKE transmitter linked to
memory position 1.
To recall the memory setting for driver two, press
MEMORY button number 2 on the driver's seat or the
UNLOCK button on the RKE transmitter linked to
memory position 2.
A recall can be cancelled by pressing any of the
MEMORY buttons on the driver's seat during a recall (S,
1, or 2), or pressing any one of the power seat buttons,
pressing the adjustable pedals button, or pressing either
the LOCK or UNLOCK button on the RKE transmitter
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111
when not in the ignition switch. When a recall is can-
celled, the driver's seat and the pedals stop moving. A
delay of one second will occur before another recall can
be selected.
NOTE: A chime sound may be heard if setting memory
was inhibited for any reason.

To Disable a RKE Transmitter Linked to Memory

1. Turn the ignition switch to the OFF position and
remove the key.
2. Press and release the memory SET button located on
the driver's seat.
3. Within 10 seconds, press and release the UNLOCK
button on the RKE transmitter.
To disable another RKE transmitter linked to either
memory position, repeat Steps 1-3 for each RKE trans-
mitter.
3