Heater Assembly Replacement - Dimplex DS5629 Service Manual

HEATER ASSEMBLY REPLACEMENT

WARNINg: If the stove was operating prior to servic-
ing, allow at least 10 minutes for light bulbs and heating
elements to cool off to avoid accidental burning of skin.
WARNINg: Disconnect power before attempting any
maintenance to reduce the risk of electric shock or damage
to persons.
1. Gently place stove on it's back on a flat surface.
2. Remove the heater cover retaining screws located on
the bottom of the stove and lower heater/light assembly
onto the floor.
3. Remove the reflector rod and motor assembly by
removing the screws on the front and rear of the heater
cover.
4. Disconnect the heater wiring connections from the
heater noting their original locations.
5. Remove the 4 heater mounting screws and remove the
heater from the unit.
6. Reassemble in the reverse order as above.
10 www.dimplex.com