Table of Contents
Advertisement
Initial Set Up
once the Battery strip has been
removed from the unit the set up
program will begin. The initial set-
up includes: Day, Type of Clock
(12hr or 24hr), Current Time and
Temperature Measurement Pref-
erence.
CAUTION: Always press the
icons with a blunt object. Sharp
objects like pen and pencil points
may damage the touch screen.
1.
select the current day of the
week, by pressing the icon on
the screen.
! NOTE: as each selection
is made, the selected icon will
become solid and the Check Icon
will appear to move to the
next option.
2.
Press the Check Icon
save selection.
3.
The default type of clock
is a 12hr, the clock can be
changed to a 24hr, by press-
ing the
back, press the
4.
using the
you can then set the time.
! NOTE: If the button is held
icon. (To revert
icon.)
and
icons,
down for longer the time will
increase faster.
! NOTE: If you notice that the
wrong day has been selected you
can press the Go Back Icon
revert to the previous screen.
5.
Press the Check Icon
save selection.
6.
The °C icon will begin to flash
as the default. To switch to °F,
press the flashing °C.
7.
once the day, time and
temperature preference have
been set, press the Check
Icon
mode.
! NOTE: If the time needs to be
adjusted, after this set up, you
can press and hold the time dis-
play for 3 seconds, to go into the
time adjustment mode or press
to
set up to adjust all of the settings.
! NOTE: at any time holding
down the temperature set point
will toggle the temperature mea-
surement preference.
to go into operation
to
to
9
Hide quick links:
Advertisement
Table of Contents
