Volvo S40 Owner's Manual page 198

Number plate lighting
– Switch off all lights and turn the ignition
key to position 0.
– Remove the screw with a screwdriver.
– Carefully detach the entire lamp housing
and withdraw it. Turn the connector anti-
clockwise and pull out the bulb.
– Replace the bulb.
– Insert the connector and turn clockwise.
– Refit the entire lamp housing and screw it
into place.
Courtesy lighting
There is courtesy lighting under the dash-
board on the driver and passenger sides.
– Insert a screwdriver and gently turn so that
the lens detaches.
– Remove the blown bulb.
– Fit a new bulb.
– Refit the lens.
09 Maintenance and service
Cargo area
– Insert a screwdriver and gently turn so that
the lamp housing comes loose.
– Remove the blown bulb.
– Fit a new bulb.
Replacing bulbs
09
197