Volvo S40 Owner's Manual page 194

Dipped beam
Removing the cover and bulb:
– Undo the whole lamp housing, see
page 192.
– Bend aside the catches and remove the
cover.
– Unplug the connector from the bulb.
– Release the spring clip that secures the
bulb. Press it in/down.
– Pull out the bulb.
Fitting a new bulb
– Fit the new bulb. It can only be fitted in
one position.
– Press the spring clip in/up and then
slightly to the right in order to snap it into
position.
– Press the connector back on.
– Refit the plastic cover.
– Refit the lamp housing, see page 192.
09 Maintenance and service
Main beam, halogen
The illustration shows a halogen bulb
– Undo the whole lamp housing, see
page 192.
– Undo the cover, located above the lamp
housing, by turning it anticlockwise.
– Left-hand headlamp:
Turn the bulb holder anticlockwise.
Right-hand headlamp:
Turn the bulb holder clockwise.
NOTE
If the car has ABL or GDL bulbs then the
main beam bulb has another socket. In
which case, pull the bulb straight out.
Replacing bulbs
09
193