Image Settings - Vivotek FD8166 User Manual

Image settings

On this page, you can tune the White balance, Image adjustment, and low light compensation.
Picture Setting 1:
For normal situations
Picture Setting 2:
For special situations
White balance: Adjust the value for the best color temperature.
■ You may follow the steps below to adjust the white balance to the best color temperature.
1. Place a sheet of paper of white or cooler-color temperature paper, such as blue, in front of the
lens, then allow the Network Camera to automatically adjust the color temperature.
2. Click the On button to Fix current value and confirm the setting while the white balance is being
measured.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5.
■ Saturation: Adjust the image saturation level, which ranges from 0 to 100%.
■ Sharpness: Adjust the image sharpness level, which ranges from 0 to 100%. You can also select
Customize and manually enter a value.
■ Gamma curve: Adjust the image sharpness level, which ranges from 0.45 to 1.0.
You may let firmware Optimize your display or select a value to change the preferred level of
Gamma correction towards higher contrast or towards the higher luminance for detailed expression
for both dark and lighted areas of an image.
■ Enable low light compensation: Select this option in low light mode, and the values of sharpness
and brightness will change automatically as the firmware exerts an automated noise reduction.
In low light mode, system will increase input gains, and as a side effect, noises will also increase.
This function reduces the noises in images taken in low light scenarios.
VIVOTEK
User's Manual - 45