Digital Input Diagram - Vivotek FD8166 User Manual

Digital Input Diagram

Please refer to the following illustration for the connection method.
Max. voltage: 40V
3.3V
Hardware Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after reset, restore the factory settings and install again.
Reset: Press and release the reset button. Wait for the Network Camera to reboot.
Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that
all settings will be restored to factory default. Upon successful restore, the status LED will blink
green and red during normal operation.
Micro SD/SDHC Card Capacity
This network camera is compliant with Micro SD/SDHC 32GB / 16GB / 8GB and other
preceding standard SD cards.
DI+
Digital input
DI-
DI-: Ground
VIVOTEK
Reset Button
User's Manual - 7