Vivotek IP8335H User Manual page 142

VIVOTEK
daymodeendtime
disableirled
enableextled
bwmode
sensitivity
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME
brightness
saturation
contrast
sharpness
gammacurve
lowlightmode
profile_i0_enable
profile_i0_policy
profile_i0_begintime
profile_i0_endtime
profile_i0_brightness
profile_i0_saturation
profile_i0_contrast
profile_i0_sharpness
142 - User's Manual
00:00~23:59 18:00
<boolean> 0
<boolean> 0
<boolean> 1
low, normal
normal,
high
VALUE DEFAULT
-5~5 -5
-5~5 0
-5~5 0
-3~3 0
0,45,50,60,70 0
,80,90,100
<boolean> 1
<boolean> 0
day, night
night,
schedule
hh:mm 18:00
hh:mm 06:00
-5~5 -5
-5~5 0
-5~5 0
-3~3 0
6/6 Day mod end time
6/6 Disable built-in IR led
1/6 Enable external IR led
6/6 Switch to B/W in night mode if
enabled
6/6 Sensitivity of light sensor
SECURITY DESCRIPTION
(get/set)
4/4 Adjust brightness of image
according to mode settings.
4/4 Adjust saturation of image
according to mode settings.
4/4 Adjust contrast of image
according to mode settings.
4/4 Adjust sharpness of image
according to mode settings.
4/4 Gamma curve.
4/4 Enable/disable low light mode.
4/4 Enable/disable this profile
setting
4/4 The mode which the profile is
applied to.
4/4 Begin time of schedule mode.
4/4 End time of schedule mode.
4/4 Adjust brightness of image
according to mode settings.
4/4 Adjust saturation of image
according to mode settings.
4/4 Adjust contrast of image
according to mode settings.
4/4 Adjust sharpness of image