Ptz > Ptz Settings - Vivotek IP8172 User Manual

VIVOTEK
PTZ > PTZ settings
Advanced Mode
This section explains how to control the Network Camera's Pan/Tilt/Zoom operation.
There are two ways to enable the camera control function:
1. Digital: Control the e-PTZ operation. Within a field of view,it allows users to quickly move the
focus to a target area for close-up viewing without physically moving the camera.
2. Mechanical: Connect the Network Camera to a PTZ driver or scanner via RS485 interface.
Digital PTZ Operation (E-PTZ Operation)
The e-PTZ control settings section will be displayed as shown below:
x1.8
x1.8
Select Stream: Select a video stream to set up the e-PTZ control. Please note that each stream can
possess its own preset and patrol settings. For detailed information about how to set up preset and patrol
settings, please refer to page 94.
Auto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed control.
Zoom factor display
If you check this item, the zoom indicator will be displayed on the home page when you zoom in/out the
live viewing window as the picture shown on the next page.
When completed with the e-PTZ settings, click Save to enable the settings on this page.
User's Manual - 93