Vivotek FE8172 User Manual page 179

trigger
triggerstatus
di
mdwin
mdwin0
vi
inter
boot, boot
di,
motion,
seq,
recnotify,
tampering,
visignal,
vi
String[40] trigger
<integer> 1
<integer> 0
<integer> 0
<integer> 0
1~999 1
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger)
6/6 The status for event trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input.
The LSB indicates DI 0.
6/6 Indicate the source window id of
motion detection.
This field is required when trigger
condition is "md".
One bit represents one window.
The LSB indicates the 1
For example, to detect the 1
windows, set mdwin as 5.
6/6 Similar to mdwin. The parameter
takes effect when profile 1 of motion
detection is enabled.
6/6 Indicate the source id of vi trigger.
This field is required when trigger
condition is "vi".
One bit represents one digital input.
The LSB indicates VI 0.
6/6 Interval of snapshots in minutes.
This field is used when trigger
condition is "seq".
VIVOTEK
st
window.
st rd
and 3
User's Manual - 179