Vivotek FD8372 User Manual page 171

trigger
triggerstatus
exttriggerstatus
exttriggerstatus1
exttriggerstatus2
di
mdwin
mdwin0
boot, boot
di,
motion,
seq,
recnotify,
tampering,
visignal,
vi
String[40] trigger
trigger, <blank>
normal_trigger
,
trigger_normal
trigger, <blank>
normal_trigger
,
trigger_normal
trigger, <blank>
normal_trigger
,
trigger_normal
<integer> 1
<integer> 0
<integer> 0
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger)
6/6 The status for event trigger
6/6 The status for event DI 1 trigger
6/6 The status for event DI 2 trigger
6/6 The status for event DI 3 trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input.
The LSB indicates DI 0.
6/6 Indicate the source window id of
motion detection.
This field is required when trigger
condition is "md".
One bit represents one window.
The LSB indicates the 1
For example, to detect the 1
rd
3 windows, set mdwin as 5.
6/6 Similar to mdwin. The parameter
takes effect when profile 1 of motion
detection is enabled.
VIVOTEK
st
window.
st
and
User's Manual - 171