Vivotek FD8372 User Manual page 116

VIVOTEK
f you want to enable recording notification, please click
Please refer to Event > Event settings on page 95 for more details.
When completed, select Enable this recording. Click Save to enable the setting and click Close
to exit this page. When the system begins recording, it will send the recorded files to the network
storage. The new recording name will appear in the drop-down list on the recording page as shown
below.
To remove a recording setting from the list, select a recording name from the drop-down list and
click Delete.
■ Click Video (Name): Opens the Recording Settings page to modify.
■ Click ON (Status): The Status will become
■ Click NAS (Destination): Opens the file list of recordings as shown below. For more information
about folder naming rules, please refer to page 101 for details.
IMPORTANT:
Due to the limitations of file system and video recording format, a video recording interrupted by
sabotage or power outage will produce inaccessible video fragments. And the loss of video makes
it difficult to identify who sabotaged the camera and the assets it aims to protect.
This revision of firmware (0100d0 and above) supports "Recoverable Recording," a feature
that enables the usability of video footages taken immediately before (less than 1 second) an
interruption. By inserting meta tags and pointers to videos, videos recorded to the onboard SD card
or networked storage is viewable even when it is abnormally discontinued. Some video frames will
still be lost, yet it is now possible to retrieve important footages taken before a camera is destroyed
or its power disconnected.
You can select the Recovered checkbox to search for the videos particularly affected by an
interruption.
116 - User's Manual
Event
OFF and stop recording.
20101210
20101211
20101212
to configure event triggering settings.