Diskette Drive Removal; Locating The Device Cage Screw; Locating The Two Diskette Drive Clips - NEC Direction SP E-Series Reference Manual

Locating the Device Cage Screw

3. Slide the cage towards the front of the system and lift it out of the unit.

Diskette Drive Removal

Remove the standard diskette drive from the system unit as follows.
1. Remove the system access cover and front panel as previously described.
2. Label and unplug the signal and power cables for the diskette drive.
3. Locate the two clips at the front of the system that secure the diskette drive.

Locating the Two Diskette Drive Clips

4. Squeeze the two clips and pull the diskette drive out of the front of the
system.
Disassembly and Reassembly 5-5