Reject A Call - Vertu Constellation Reference Manual

Use your voice to call a contact
When using your Bluetooth headset, you can use the Voice commands application to
speak commands or make calls to contacts with voice tags.
Commands are automatically created by your phone.
Tip: When entering contacts or editing voice commands, do not use very short or
similar names for different contacts or commands.
1 When a Bluetooth headset with a headset key is attached, press the headset key.
2 A short tone sounds, and Speak now is displayed. Clearly say the contact name.
3 The phone repeats the contact's name, and displays the name and number. To
cancel the voice dialing, select Quit.
Tip: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
Listen to a voice command for a contact
1 When a Bluetooth headset with a headset key is attached, select a contact and
> Voice tag details.
2 Select a contact detail.
If several numbers are saved for a name, you can say also the name and the number
type, such as cellular phone or telephone.

Reject a call

When a call arrives, select
To send a message explaining why you cannot answer the call, proceed as below.
Send the reject call text message
1 When a call arrives, select
2 To send the message, select
3 Reject the call.
Edit the standard reject call text message
> Settings and Calling > Call > Message text, and write the message.
Select
Tip: You can automatically divert rejected calls to your voice mailbox or another
phone number (network service). Select
forwarding > Voice calls > If busy > Activate > To voice mailbox or To other
number.
.
, and edit the message.
.
> Settings and Calling > Call
© 2012 Vertu. All rights reserved.
Calls 47