Toyota SIENNA 2010 Quick Reference Manual page 11

FEATURES/OPERATIONS
Cruise control (if equipped)
Turning system ON/OFF
Functions
Cancel
1
The set speed may also be cancelled by depressing the brake pedal.
1
The set speed may be resumed once vehicle speed reaches 25 mph.
2
Dynamic Laser Cruise Control (if equipped)
Refer to the Owner's Manual for more details and complete safety
precautions before attempting to use the "Dynamic Laser Cruise
Control."
Fixed speed mode
(2) Push and hold
To set, cancel and resume a speed Refer to "Functions" in the Cruise
Control section above, and to the Owner's Manual for more details.
System ON/OFF
Resume /Increase speed
2
Set/Decrease speed
(1) Push
System ON/OFF
18
Distance control mode
Push
System ON/OFF
The distance control mode will cruise at a set speed, decelerate to
maintain a selected distance from a slower vehicle traveling in front of
you, and accelerate back up to the selected speed if the vehicle in front
changes lanes or speeds up.
To set, cancel and resume a speed Refer to "Functions" in the Cruise
Control section at left, and your Owner's Manual for more details.
NOTE: Once vehicle speed is set, pushing lever up toward "+ RES" will
increase speed to the nearest 5 mph, and then in 5 mph increments.
Pushing lever down toward "- SET" will reduce speed in the same way.
Changing vehicle-to-vehicle distance
Pull
Light control-Instrument panel
Bright Dark
LONG
MIDDLE
SHORT
19