Automatic Transmission 2; Features/Operations; Lights/Turn Signals - Toyota SIENNA 2010 Quick Reference Manual

Hide thumbs Also See for SIENNA 2010:
Table of Contents

Advertisement

FEATURES/OPERATIONS

Auto lock functions
Automatic door locks can be programmed to operate in four different
modes, or turned OFF.
-Doors lock when shifting from Park.
-Doors lock when the vehicle speed goes above approximately 12 mph.
-Doors unlock when the engine key is turned to the "ACC" or "LOCK"
position and driver's door is opened.
-Doors unlock when shifting into Park.
Automatic Transmission
P
Park*
R
Reverse
Neutral
N
Drive
D
Fourth gear
4
Third gear
3
Second gear
2
L
First gear
* The engine switch must be "ON" and the brake pedal depressed to shift
from Park.
Downshifting increases power going uphill, or provides engine braking
downhill. For best fuel economy during normal driving conditions, always
drive with the shift lever in the "D" position.
Tilt and telescopic steering wheel
Lock release lever
Hold wheel, push lever down, set angle and length, and return lever.
Note: Do not attempt to adjust while the vehicle is in motion.
Angle
Length
8
Lights & turn signals
Headlights
AUTO*
Headlights
Parking lights
* If equipped
-Daytime Running Light system (if equipped) Automatically turns on the
headlights at a reduced intensity.
-Automatic light cut off system Automatically turns lights off after 30
seconds when any of the doors are opened and closed with the engine
off. Lights may also be turned off by pushing lock button on remote once
more after locking.
Turn signals
Right turn
Lane change
Lane change
Left turn
Front fog lights (if equipped)
Front fog lights come on only when the headlights are on low beam.
Headlight beam level control (if equipped)
Up
Down
Higher number will lower the beam.
High beam
Low beam
High beam flasher
Turn
Up
Down
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents