Page 1: Quick Reference
CAMRY HYBRID 2 0 1 0 CUSTOMER EXPERIENCE CENTER 1-800-331-4331 QUICK REFERENCE GUIDE Printed in U.S.A. 1/09 00505-QRG10-CAMH 08-TCS-02937...
Page 2 Pull up Your dealership and the entire staff of Toyota Motor Sales, U.S.A., Inc. wish you many years of satisfied driving in your new Camry Hybrid.
Page 3: Table Of Contents
Seatbelts-Shoulder belt anchor Spare tire & tools Tire Pressure Monitoring (warning) System 24 Trunk-Internal release Visit your Toyota dealer for information on customizing this feature. Programmable by customer. Refer to the Owner’s Manual for instructions and more information. ® HomeLink...
Page 4 OVERVIEW Instrument panel Steering wheel controls Steering wheel audio controls Steering wheel climate controls Multi-information display button Voice command button Telephone controls Headlight,turn signal and front fog light controls Wiper and washer controls Emergency flasher button Audio system or navigation system with integrated audio system Air Conditioning controls Tire Pressure Monitoring (warning) System (in glove box) Rear window and outside rearview mirror defogger switch...
Page 5 AUX or USB/AUX audio jack Wire pass through Seat heater controls “POWER” switch Cruise control Tilt and telescopic steering lock release Auxiliary boxes Air Conditioning/Heating economy (ECO) mode switch Fuel filler door opener Power outside rearview mirror controls If equipped For details, refer to the “Navigation System Owner’s Manual.”...
Page 6: Instrument Cluster
OVERVIEW Instrument cluster Engine coolant temperature Service indicator and reminder Fuel economy meter Gear shift position indicator Speedometer Fuel gauge Trip meter reset knob/Instrument panel light control Multi-information display Driving ready light...
Page 7: Indicator Symbols
Cruise control set indicator If indicator does not turn off within a few seconds of starting engine, there may be a malfunction. Have vehicle inspected by your Toyota dealer. If this light flashes, refer to “Cruise control,” Section 2-4, 2010 Owner’s Manual.
Page 8: Keyless Entry 1
OVERVIEW Keyless entry Locking operation Push Unlocking operation Push ONCE: Driver door TWICE: All doors NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for safety. Trunk lid operation Push and hold Panic button Push and hold...
Page 9 Smart Key system Start function Green indicator ON Depress Push Carrying brake pedal NOTE: Gear shift lever must be in “Park” and brake pedal depressed. Power (without starting Hybrid System) Without depressing the brake pedal, pressing the “POWER” switch will change the operation mode in succession from: Accessories such as the radio will operate.
Page 10: Fuel Tank Door Release And Cap
OVERVIEW Fuel tank door release and cap Push* Turn * It may take up to 10 seconds after pushing button for the Store door to open if the internal tank pressure is high. NOTE: Tighten until one click is heard. If the cap is not tightened enough, Check Engine “...
Page 11: Engine Maintenance
Hood release Pull Pull up latch and raise hood Engine maintenance Engine oil filler cap Engine oil level dipstick Windshield washer fluid tank Engine coolant reservoir Note: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance. Please refer to the “Owner’s Warranty Information Booklet,”...
Page 12: Hybrid Synergy Drive System
FEATURES/OPERATIONS Hybrid Synergy Drive System The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine and electric motor to provide the most efficient combination of power for the vehicle. To conserve energy, when the brakes are applied the braking force generates electricity which is then sent to the traction battery.
Page 13: Auto Lock Functions 2
Auto lock functions Automatic door locks can be programmed to operate in four different modes, or turned OFF. -Doors lock when shifting from Park. -Doors lock when the vehicle speed goes above approximately 12 mph. -Doors unlock when shifting into Park. -Doors unlock when the “POWER”...
Page 14: Parking Brake
FEATURES/OPERATIONS Tilt and telescopic steering wheel Angle Length Lock release lever Hold wheel, push lever down, set angle and length, and return lever. Note: Do not attempt to adjust while the vehicle is in motion. Parking brake Set: Depress Release: Depress again Windows-Power Driver side Window lock switch...
Page 15: Windshield Wipers & Washers
Windshield wipers & washers Single wipe Adjust frequency* Interval wipe Slow Fast Pull to wash and wipe * Intermittent windshield wiper frequency adjustment Rotate to increase/decrease wipe frequency. Lights & turn signals Headlights Headlights Low beam Parking lights Auto DRL OFF High beam flasher High beam -Daytime Running Light system (DRL) Automatically turns on the...
Page 16: Seat Adjustments-Front
FEATURES/OPERATIONS Seat adjustments-Front Manual seat Power seat Seatback angle Seat position (forward/backward) Lumbar support (driver side only) Position, cushion angle and height (driver side only) Seats-Head restraints Lock release button Seats-Folding rear seats Pull Fold down...
Page 17: Cruise Control
Refer to “Garage door opener,” Section 3-7 in the Owner’s Manual for more details. For programming assistance, contact the Toyota Customer Experience Center at 1-800-331-4331, or visit http://www.homelink.com. ®...
Page 18: Telephone Controls (Bluetooth ® )
FEATURES/OPERATIONS Telephone controls (Bluetooth ® (if equipped) Audio unit Microphone Steering wheel telephone switches Volume Voice command End call button Start call ® Bluetooth technology allows dialing or receipt of calls without taking hands from the steering wheel or using a cable to connect the compatible telephone and the system.
Page 19: Moonroof
Multi-information display Push “DISP” to change information in the following: (1) Outside temperature (2) Miles left on remaining fuel (3) Current gas mileage (4) Running distance from engine start (5) Average vehicle speed from engine start (6) Multi-information display OFF (7) Zoom display of odometer and trip meter (8) Energy monitor (9) Average gas mileage...
Page 20 FEATURES/OPERATIONS Audio Type 1 Push to adjust Eject CD tone & balance Push to turn ON/OFF Push to skip up/down folder Mode Seek station/ CD track select View CD text Preset buttons - functions in other modes indicated above number Station/CD track scan Type 2...
Page 21: Steering Wheel Switches
RADIO To preset stations Tune in the desired station and hold down a preset button until you hear a beep. Push desired preset button to select. To scan stations Push and hold “SCAN” to scan preset stations. Push again to hold selection. AUX or USB/AUX audio jack AUX audio jack USB/AUX audio jack...
Page 22 FEATURES/OPERATIONS Air Conditioning/Heating “DUAL” button Indicator ON: Separate temperature settings for driver and passengers. Indicator OFF: Synchronize temperature settings for driver and passengers. Temperature selector (driver side) Fan speed Airflow vent In “ ” mode, use fresh air (“ ” indicator OFF) to reduce window fogging.
Page 23: Clock
“ECO HEAT/COOL” switch Economical mode ON/OFF NOTE: Slightly improves gas mileage. It may take longer to reach set cabin temperature. Plasmacluster Improves air quality by emitting positive and negative ions into the cabin. This system operates from the driver side vent and a low system noise is normal.
Page 24: Cup Holders
FEATURES/OPERATIONS Door locks Unlock Lock Power outlets Instrument panel Center console “POWER” switch must be set at “ACC” or “ON” to be used. Cup holders Front Rear...
Page 25: Doors-Child Safety Locks
SAFETY AND EMERGENCY FEATURES Doors-Child safety locks Rear door Moving the lever to “LOCK” will allow the door to be opened only from the outside. Seatbelts Take up slack Too high Keep as low on hips as possible If belt is fully extended, then retracted even slightly, it cannot be re-extended beyond that point, unless fully retracted again.
Page 26: Seatbelts-Shoulder Belt Anchor
If the tire pressure indicator flashes for more than 60 seconds and then remains on, take the vehicle to your local Toyota dealer. Note: The warning light may come on due to temperature changes or changes in tire pressure from natural air leakage. If the system has not been initialized recently, setting the tire pressures to factory specifications should turn off the light.
Page 27 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Air Conditioning Anti-lock Brake System Automatic Locking Retractor Child Restraint System DISP Display Economical/Ecology Electronic Control Unit Event data recorder Emergency Locking Retractor Electric Power Steering GAWR Gross Axle Weight Ratings GVWR Gross Vehicle Weight Rating Emission inspection and maintenance LATCH Lower Anchors and Tethers for Children...
Page 28 TABLE OF CONTENTS Index 1-7. Theft deterrent system Before driving Immobilizer system....87 Theft prevention labels (for U.S.A.) ......89 1-1. Hybrid system Hybrid system ...... 22 1-8. Safety information Correct driving posture ..90 1-2. Key information SRS airbags ......92 Keys ........
Page 29 2-4. Using other driving systems 3-3. Using the hands-free phone system Cruise control...... 161 (for cellular phone) Driving assist systems ..165 ® Bluetooth audio system..241 ® Using the Bluetooth 2-5. Driving information audio system ....244 Cargo and luggage ..... 169 ®...
Page 30 TABLE OF CONTENTS Index 3-7. Other interior features 4-3. Do-it-yourself maintenance Sun visors ......300 Do-it-yourself service precautions ....... 333 Vanity mirrors ..... 301 Hood ........336 Clock ........302 Positioning a floor jack..337 Ashtray ....... 303 Engine compartment ..339 Power outlet .......
Page 31 5-2. Steps to take in an emergency For owners If a warning light turns on or a warning buzzer sounds......397 Reporting safety defects If a warning message is for U.S. owners ....476 displayed......406 Seat belt instructions If you have a flat tire....
Page 32: For Your Information
A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available on the market. You should know that these parts are not covered by Toyota warranty and that Toyota is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 33 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 34 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 35 In the event that your vehicle must be disposed of, the hybrid battery must be disposed of by your Toyota dealer or a qualified service shop. If the hybrid battery is not disposed of properly, it...
Page 36 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 37: Before Driving
TABLE OF CONTENTS Information on the hybrid system and adjusting and op- Before driving erating features such as door locks, mirrors, and steer- ing column. When driving Driving, stopping and safe-driving information. Interior fea- Air conditioning and audio systems, as well as other in- tures terior features for a comfortable driving experience.
Page 38 Pictorial index Exterior Headlights (low beam) Side marker/parking lights P. 154 P. 154 ∗ Moon roof P. 78 Headlights (high beam) P. 154 Outside rear view Hood P. 336 mirrors P. 74 Windshield wipers P. 159 Turn signal lights P. 141 ∗...
Page 39 Rear window defogger P. 190 Rear turn signal lights P. 141 Fuel filler door P. 82 Trunk P. 55 Doors P. 51 Tires ●Rotation P. 352 Stop/tail lights P. 154 ●Replacement P. 417 ●Inflation pressure P. 453 Side marker lights ●Information P.
Page 40 Pictorial index Interior Head restraints SRS driver airbag P. 61 P. 92 Floor mat P. 309 Seat belts P. 63 Power window SRS front passenger switches airbag P. 76 P. 92 Glove box P. 294 Armrest P. 308 Front seats P.
Page 41 Vehicles with moon roof Vanity mirrors P. 301 Sun visors P. 300 Auxiliary box P. 297 Moon roof switches P. 78 Front personal lights P. 292 Interior light P. 291 SRS curtain shield airbags P. 92 Rear personal lights P. 292 ∗...
Page 42 Pictorial index Interior Vehicles without moon roof Vanity mirrors P. 301 Sun visors P. 300 Auxiliary box P. 297 Front personal lights P. 292 SRS curtain shield airbags P. 92 Interior light P. 291 ∗ Garage door opener switches P. 312 Anti-glare inside rear view mirror P.
Page 43 Power window switches P. 76 Door lock switch P. 51 Window lock switch P. 76 Inside lock button P. 51 ∗ : If equipped...
Page 44 Pictorial index Instrument panel Gauges and meters P. 144 Windshield wiper and Multi-information display P. 150 washer switch P. 159 Audio system P. 191 Headlight switch P. 154 Navigation system * Turn signal lever P. 141 Emergency flashers P. 390 Clock P.
Page 45 Air conditioning system P. 182 Rear window defogger switch/ Rear window defogger switch and ∗ outside rear view mirror defogger switch P. 190 ∗ : If equipped : Refer to “Navigation System Owner’s Manual”.
Page 46 Pictorial index Instrument panel Audio remote control Air conditioning remote switches P. 238 control switches P. 187 ∗ Telephone switches P. 262 “DISP” switch P. 151 ∗ Talk switch P. 262 Cruise control switch P. 161 Power (ignition) switch P. 135...
Page 47 ∗ USB/AUX adapter P. 217, 224 ∗ AUX adapter P. 236 Power outlet P. 304 Cable pass-through P. 299 ∗ Seat heater switches P. 306 ∗ : If equipped : Refer to “Navigation System Owner’s Manual”.
Page 48: 1-1. Hybrid System
1-1. Hybrid system Hybrid system Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles. Be sure you are closely familiar with the char- acteristics of your vehicle, and operate with care. The hybrid system combines a gasoline engine and an electric motor (traction motor) according to driving conditions, improving fuel efficiency and reducing exhaust emissions.
Page 49 30 minutes or 10 miles (16 km). If the hybrid battery becomes fully discharged, you are unable to jump-start the vehi- cle with the 12-volt battery, contact your Toyota dealer. ● If the shift lever is in N, the hybrid battery (traction battery) will not be charged.
Page 50 After the 12-volt battery has discharged or has been changed or removed The gasoline engine may not stop even if the vehicle is running on the hybrid battery (traction battery). If this continues for a few days, contact your Toyota dealer. ■...
Page 51 1-1. Hybrid system High voltage components Air conditioning compressor Electric motor (traction motor) and transaxle Power control unit Caution label High voltage cables Hybrid battery (traction bat- tery) and DC/DC converter Take care when handling the hybrid system, as it contains a high volt- age system (about 650V at maximum) as well as parts that become extremely hot when the hybrid system is operating.
Page 52 If the emergency shut off system activates, your vehicle will not restart. To restart the hybrid system, contact your Toyota dealer. Energy monitor/consumption/past record screen You can view the status of your hybrid system on the multi-infor- mation display (→P.
Page 53: Energy Monitor
1-1. Hybrid system ■ Energy monitor ● How to display on the navigation system screen (if equipped): Press “INFO”. STEP Touch “Fuel Consumption” on STEP the “Information” screen. If the “Consumption” or “Past Record” screen displayed, touch ● How to display on the multi-information display: Press the “DISP”...
Page 54 1-1. Hybrid system Multi-information Navigation system screen display When the vehi- cle is powered by both the gas- oline engine and the electric motor (traction motor) When the vehi- cle is powered by the gasoline engine When the vehi- cle is charging the hybrid bat- tery (traction battery)
Page 55 1-1. Hybrid system ■ Consumption (navigation system only) Press “INFO”. STEP Touch “Fuel Consumption” on STEP the “Information” screen. If the “Energy Monitor” or “Past Record” screen displayed, touch Fuel consumption in the past 30 minutes Regenerated energy in the past 30 minutes One symbol indicates 50 Wh.
Page 56 1-1. Hybrid system ■ Past Record (navigation system only) Press “INFO”. STEP Touch “Fuel Consumption” on STEP the “Information” screen. If the “Energy Monitor” or “Con- sumption” screen is displayed, touch Average fuel consumption Best fuel economy among average ■ Resetting the consumption data Touching will reset the fuel consumption or past record.
Page 57 12-volt battery has been disconnected The hybrid system may not start. In that case, try to start the system again. If the “READY” indicator does not come on, contact your Toyota dealer. ■ When refueling, the fuel filler door may take a few moments to open As part of emission system operation, it may take up to 10 seconds for the fuel filler door to automatically release after the opener switch is pressed.
Page 58 1-1. Hybrid system CAUTION ■ High voltage precautions The vehicle has high voltage DC and AC systems as well as a 12-volt sys- tem. DC and AC high voltage is very dangerous and can cause severe burns and electric shock that may result in death or serious injury. ●...
Page 59 1-1. Hybrid system CAUTION ■ Road accident cautions Observe the following precautions to reduce the risk of injury. ● Pull your vehicle off the road, put the shift lever in P, apply the parking brake, and turn the hybrid system off. ●...
Page 60 1-1. Hybrid system NOTICE ■ Hybrid battery air vent ● Do not put foreign objects over the air vent. The hybrid battery (traction battery) may overheat and be damaged. ● Clean the air vent regularly to prevent the hybrid battery (traction battery) from overheating.
Page 61: 1-2. Key Information
Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 430)
Page 62 1-2. Key information ■ When riding in an aircraft When bringing an electronic key onto an aircraft, make sure you do not press any buttons on the electronic key while inside the aircraft cabin. If you are carrying an electronic key in your bag etc, ensure that the buttons are not likely to be pressed accidentally.
Page 63: Opening, Closing And
1-3. Opening, closing and locking the doors Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks and unlocks the doors (→P. 38) Unlocks the trunk (→P.
Page 64 1-3. Opening, closing and locking the doors Unlocking and locking the doors (front door handles only) Grip the handle to unlock the door. Make sure to touch the sensor on the back of the handle. The door cannot be unlocked for 3 seconds after the door is locked.
Page 65 1-3. Opening, closing and locking the doors Antenna location and effective range ■ Antenna location Antennas outside the cabin Antenna outside the trunk Antenna inside the trunk Antennas inside the cabin...
Page 66 1-3. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the outside front door handles.
Page 67 1-3. Opening, closing and locking the doors ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless remote control from operating properly.
Page 68 1-3. Opening, closing and locking the doors The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.) Multi-information Unlocking doors Beep display Hold the driver's door han-...
Page 69 1-3. Opening, closing and locking the doors ■ Electronic key battery depletion ● The standard battery life is 1 to 2 years. (The battery becomes depleted even if the electronic key is not used.) If the smart key system or the wireless remote control function does not operate, or the detection area becomes smaller, the battery may be depleted.
Page 70 1-3. Opening, closing and locking the doors ● The doors may unlock if a large amount of water splashes on the door handle, such as in the rain or in a car wash. (The doors will automatically be locked after approximately 60 seconds if the doors are not opened and closed.) ●...
Page 71 1-3. Opening, closing and locking the doors The following table describes circumstances and correction procedures when only alarms are sounded. Alarm Situation Correction procedure Tried to lock the doors Retrieve the elec- using the entry function tronic key from the while the electronic key is passenger compart- still inside the passenger...
Page 72 ■ When the electronic key battery is fully depleted →P. 370 ■ Customization that can be configured at Toyota dealer It is possible to deactivate the smart key system, etc. (Customizable features →P. 470) ■ Certification for the smart key system For vehicles sold in the U.S.A.
Page 73 (→P. 39) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves.
Page 74: Wireless Remote Control
1-3. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors.
Page 75 →P. 370 ■ Conditions affecting operation →P. 41 ■ Customization that can be configured at Toyota dealer Settings (e.g. trunk unlocking function) can be changed. (Customizable features →P. 470) ■ Certification for wireless remote control For vehicles sold in the U.S.A.
Page 76 1-3. Opening, closing and locking the doors NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 77: Doors
1-3. Opening, closing and locking the doors Doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function →P. 38 ■ Wireless remote control →P. 48 ■ →P. 431 ■...
Page 78 1-3. Opening, closing and locking the doors Locking the front doors from the outside without a key The door cannot be locked if the “POWER” switch is in ACCESSORY or ON mode, or the electronic key is left inside the vehicle. Depending on the position of the electronic key, the key may not be detected correctly and the door may be locked.
Page 79 1-3. Opening, closing and locking the doors ■ Setting and canceling the functions To switch between set and canceled, follow the procedure below: Close all the doors and switch the “POWER” switch to ON STEP mode. (Perform step 2 within 20 seconds.) Shift the shift lever to P or N, and STEP press and hold the driver's door...
Page 80 1-3. Opening, closing and locking the doors ■ Customization that can be configured at Toyota dealer Settings (e.g. unlocking function using a key) can be changed. (Customizable features →P. 470) CAUTION ■ To prevent an accident Observe the following precautions while driving the vehicle.
Page 81: Trunk
1-3. Opening, closing and locking the doors Trunk The trunk can be opened using the key, trunk opener, entry function or wireless remote control. ■ Opening the trunk from outside the vehicle Entry function →P. 38 Wireless remote control →P. 48 →P.
Page 82 1-3. Opening, closing and locking the doors ■ Internal trunk release lever The trunk lid can be opened by pulling up the glow-in-the-dark lever located on the inside of trunk lid. The lever will continue to glow for some time after the trunk lid is closed. ■...
Page 83 ● Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to fall closed again after it is opened.
Page 84: Adjustable Components
1-4. Adjustable components (seats, mirrors, steering wheel) Front seats Power seat Seat position switch Seatback angle switch Seat cushion (front) angle switch (driver’s side only) Vertical height adjustment switch (driver’s side only) Lumbar support switch (driver’s side only)
Page 85 1-4. Adjustable components (seats, mirrors, steering wheel) Manual seat Seatback angle adjustment lever Seat position adjustment lever CAUTION ■ Seat adjustment ● Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of...
Page 86: Rear Seats
1-4. Adjustable components (seats, mirrors, steering wheel) Rear seats ■ Folding down rear seatbacks Pull the seatback lever in the trunk for the seatback you wish to fold down. CAUTION ■ After returning the seatback to the upright position Observe the following precautions. Failure to do so may result in death or serious injury.
Page 87: Head Restraints
1-4. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Pull the head restraints up. Down Push the head restraint down while pushing the lock release button. Lock release button ■ Removing the head restraints Pull the head restraint up while pressing the lock release button.
Page 88 1-4. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the rear center seat head restraint Always raise the head restraint one level from the stowed position when using.
Page 89: Seat Belts
1-4. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 90 1-4. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the belt (front seats) Down Move the height adjuster up and down as needed until you hear a click. Seat belt comfort guide (outside rear seat) If the shoulder belt fits close to a person's neck, use the seat belt comfort guide.
Page 91 1-4. Adjustable components (seats, mirrors, steering wheel) Buckle, position and release the STEP seat belt. Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision.
Page 92 1-4. Adjustable components (seats, mirrors, steering wheel) ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.
Page 93 Toyota dealer free of charge. ■ Rear seat belts Use the seat belt after passing it through the guide if the seat belt comes free from...
Page 94 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 95 ● Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 96 1-4. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Using a seat belt comfort guide ● Make sure the belt is not twisted and that it lies flat. The elastic cord must be behind the belt and the guide must be on the front. ●...
Page 97: Steering Wheel
1-4. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP press the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 98: Anti-Glare Inside Rear View Mirror
1-4. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.
Page 99 1-4. Adjustable components (seats, mirrors, steering wheel) ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
Page 100: Outside Rear View Mirrors
1-4. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch when the “POWER” switch is in ACCESSORY or ON mode. Select a mirror to adjust. STEP Left Right Adjust the mirror. STEP Right Down...
Page 101 1-4. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When driving the vehicle Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. ●...
Page 102: Power Windows
1-5. Opening and closing the windows Power windows The power windows can be opened and closed using the following switches. Closing One-touch closing Opening One-touch opening Pressing the switch in the opposite direction will stop win- dow travel partway. Lock switch Press the switch down to lock passenger window switches.
Page 103 1-5. Opening and closing the windows ■ The power windows can be operated when The “POWER” switch is in ON mode. ■ Operating the power windows after turning the hybrid system off The power windows can be operated for approximately 45 seconds after the “POWER”...
Page 104: Moon Roof
1-5. Opening and closing the windows ∗ Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Open The moon roof stops slightly before the fully open position. Push the switch again to fully open.
Page 105 1-5. Opening and closing the windows ■ The moon roof can be operated when The “POWER” switch is in ON mode. ■ Operating the moon roof after turning the hybrid system off The moon roof can be operated for approximately 45 seconds after the “POWER”...
Page 106 Check to make sure that the moon roof is completely closed and then release the switch. If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer.
Page 107 1-5. Opening and closing the windows CAUTION ■ Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.
Page 108: Refueling Opening The Fuel Tank Cap
1-6. Refueling Opening the fuel tank cap The fuel tank of your vehicle has a special structure, which requires a reduction in fuel tank pressure before refueling. After the opener switch has been pressed, it will take several seconds until the vehi- cle is ready for refueling.
Page 109 1-6. Refueling If the pressure in the fuel tank high, message “PLEASE WAIT OPENING” will appear on the multi-information display. may take up to 10 seconds. Turn the fuel tank cap slowly STEP to open. Hang the fuel tank cap on the STEP back of the fuel filler door.
Page 110 When the fuel filler door opener is inoperable ● If the fuel filler door opener switch cannot be operated, contact your Toyota dealer to service the vehicle. In cases where refueling is urgently necessary, the fuel filler door can be opened using the lever in the trunk.
Page 111 This may cause static electricity to build up, resulting in a possible ignition hazard. ■ When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 112 1-6. Refueling NOTICE ■ Refueling ● Finish refueling within 30 minutes. If more than 30 minutes passes, the internal valve closes. In this condition, fuel may spill out if you continue to refuel the vehicle. About 5 minutes after the valve is closed, a message “CLOSE FUEL LID”...
Page 113: 1-7. Theft Deterrent System
1-7. Theft deterrent system Immobilizer system The vehicle's keys have built-in transponder chips that prevent the hybrid system from starting if the key has not been previously regis- tered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. The indicator light flashes after the “POWER”...
Page 114 1-7. Theft deterrent system ■ Certifications for the immobilizer system For vehicles sold in Canada This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.
Page 115: Theft Prevention Labels (For U.s.a.)
1-7. Theft deterrent system Theft prevention labels (for U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.
Page 116: 1-8. Safety Information
1-8. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (→P. 58) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 117 1-8. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 118: Srs Airbags
1-8. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 119 1-8. Safety information Airbag system components Front airbag sensors Front passenger’s seat belt buckle switch Front passenger occupant classification system (ECU Airbag sensor assembly and sensors) Curtain shield airbag sen- Side and curtain shield air- sors bag sensors Driver airbag Front passenger airbag Driver’s seat position sen- Side airbags...
Page 120 1-8. Safety information The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and an airbag sensor. In certain types of severe frontal or side impacts, the SRS airbag sys- tem triggers the airbag inflators.
Page 121 1-8. Safety information ■ SRS warning light This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sen- sors, driver's seat position sensor, driver's seat belt buckle switch, front pas- senger occupant classification system, “AIR BAG ON”...
Page 122 1-8. Safety information ■ SRS airbag deployment conditions (side airbags and curtain shield air- bags) ● The SRS side airbags and SRS curtain shield airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to the impact force produced by a 3300 lb.
Page 123 1-8. Safety information ■ Types of collisions that may not deploy the SRS airbag (side airbags and curtain shield airbags) The SRS side airbags and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a col- lision to the side of the vehicle body other than the passenger compartment.
Page 124 1-8. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. Do not disconnect the 12-volt battery cables before contacting your Toyota dealer. ● Any of the SRS airbags have been inflated.
Page 125 1-8. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts.
Page 126 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are the safest for infants and children.
Page 127 1-8. Safety information CAUTION ■ SRS airbag precautions ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. ● Do not drive the vehicle while the driver or passenger has items resting on their knees.
Page 128 1-8. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to areas such as the door, windshield glass, side door glass, front and rear pillars, roof side rail or assist grip. ● Do not hang coat hangers or other hard objects on the coat hooks.
Page 129 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillars garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ■ Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer.
Page 130: Front Passenger Occupant Classification System
1-8. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
Page 131 1-8. Safety information Conditions and operation of the front passenger occupant classification system ■ Adult* “AIR BAG ON” and “AIR BAG OFF” indi- “AIR BAG cator lights ON” Indicator/ SRS warning light warning light Front passenger’s seat belt reminder light Flashing Front passenger airbag Side airbag on the front...
Page 132 1-8. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” indi- Not illuminated cator lights Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seats Devices Curtain shield airbag in the front Activated...
Page 133 1-8. Safety information *4: Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P. 109) *5: In case the indicator is not illuminated, consult this manual as for installing the child restraint system properly.
Page 134 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 135: Child Restraint Systems
1-8. Safety information Child restraint systems A child restraint system for a small child or baby must be properly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of U.S.A. and Canada now require the use of child restraint systems.
Page 136 1-8. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat...
Page 137 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 138 1-8. Safety information CAUTION ■ Child restraint precautions ● Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of a sudden stop, sudden swerve or collision.
Page 139: Installing Child Restraints
1-8. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the outside rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 140 1-8. Safety information Anchor bracket (for top tether strap) Anchor brackets are provided for all rear seats. Installation with LATCH system Type A Widen the gap between STEP the seat cushion and seatback slightly. Latch the hooks of the STEP lower straps onto the LATCH anchors.
Page 141 1-8. Safety information Type B Widen the gap between STEP the seat cushion and seatback slightly. Latch the buckles onto STEP the LATCH anchors. If the child restraint has a STEP top tether strap, the top tether strap should be latched onto tether strap anchor.
Page 142 1-8. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing ⎯ Infant seat/convertible seat ■ Place the child seat on the rear STEP seat facing the rear of the vehi- cle. Run the seat belt through the STEP child seat and insert the plate into the buckle.
Page 143 1-8. Safety information While pushing the child seat STEP down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that in cannot be extended.
Page 144 1-8. Safety information While pushing the child seat into STEP the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 145 1-8. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap Secure the child restraint using STEP the seat belt or LATCH anchors. Remove the head restraint.
Page 146 1-8. Safety information ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819. CAUTION ■...
Page 147 1-8. Safety information CAUTION ■ When installing a child restraint system Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of sudden braking, sudden swerving or an accident.
Page 148 1-8. Safety information CAUTION ■ When installing a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child's shoulder. The belt should be kept away from the child's neck, but not so that it could fall off the child's shoulder.
Page 149 2-2. Instrument cluster Gauges and meters The following gauges, meters and displays illuminate when the “POWER” switch is in ON mode. Engine coolant temperature gauge Displays the engine coolant temperature. Fuel economy meter Displays the current fuel consumption in analog form when the hybrid system is operating.
Page 150 2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted. Brighter Darker When the headlight switch is turned on, the brightness will be reduced slightly unless the control dial is turned fully clockwise. ■...
Page 151 2-2. Instrument cluster NOTICE ■ To prevent damage to the engine and its components The gasoline engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place.
Page 152 2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel...
Page 153 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Front fog light indicator (→P. 141) (→P. 158) (if equipped) Headlight high beam SRS airbag on-off indi- indicator (→P. 155) cator (→P.
Page 154 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 155: Multi-Information Display
2-2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of driving-related data, including the outside temperature. ● Outside temperature dis- play (→P. 151) Indicates the outside tempera- ture. ● Trip information (→P. 151) Displays driving range, fuel consumption and other cruis- ing-related information.
Page 156 2-2. Instrument cluster Switch the display Display items can be switched by pressing the “DISP” button. The display will return to the out- side temperature display when the “DISP” button is pressed and held. ● Outside temperature Displays the outside air temperature. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C).
Page 157 2-2. Instrument cluster ● Driving distance Displays the driving distance since the hybrid sys- tem was started. ● Average vehicle speed Displays the average vehicle speed since the hybrid system was started. ● Cruise information off Displays the odometer and trip meters only. ●...
Page 158 2-2. Instrument cluster ■ Outside temperature display In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change. ● When stopped, or driving at low speeds (less than 12 mph [20 km/h]) ●...
Page 159: 2-3. Operating The Lights And Wipers
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. For U.S.A. The side marker, park- ing, tail, license plate and instrument panel lights turn on. The headlights and all lights listed above turn The headlights and parking lights turn on and off automatically.
Page 160 2-3. Operating the lights and wipers For Canada The side marker, park- ing, tail, license plate and instrument panel lights turn on. The headlights and all lights listed above turn The headlights and parking lights turn on and off automatically. (When the “POWER”...
Page 161 To turn the lights on again, turn the “POWER” switch to ON mode, or turn the headlight switch off and then back to position. ■ Customization that can be configured at Toyota dealer Settings of light sensor sensitivity can be changed. (Customizable features →P. 470)
Page 162 2-3. Operating the lights and wipers NOTICE ■ To prevent the 12-volt battery from being discharged Do not leave the lights on longer than necessary when the hybrid system is off.
Page 163: Fog Light Switch
2-3. Operating the lights and wipers ∗ Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. Front fog lights on ∗...
Page 164: Windshield Wipers And Washer
2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation. Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency...
Page 165 2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically. ■ The windshield wipers and washer can be operated when The “POWER” switch is in ON mode. ■ If no windshield washer fluid sprays Check that the washer nozzles are not blocked and if there is washer fluid in the windshield washer fluid reservoir.
Page 166: 2-4. Using Other Driving Systems
2-4. Using other driving systems Cruise control Use the cruise control to maintain a set speed without using the accelerator. Indicators Cruise control switch ■ Setting the vehicle speed Turn the “ON-OFF” button on. STEP At this time, the cruise control indicator will come on.
Page 167 2-4. Using other driving systems ■ Adjusting the speed setting Increase speed Decrease speed Hold the lever until the desired speed setting is obtained. Fine adjustment of the set speed (approximately 1.0 mph [1.6 km/h]) can be made by lightly pushing the lever up or down and releasing it.
Page 168 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Contact your Toyota dealer and have your Toyota inspected.
Page 169 2-4. Using other driving systems CAUTION ■ To avoid operating the cruise control by mistake Keep the “ON-OFF” button off when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in control of the vehicle being lost and could cause an accident resulting in death or serious injury.
Page 170: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 171 The system should return to normal within 10 minutes. ■ If the slip indicator comes on... It may indicate a malfunction in the VSC and TRAC. Contact your Toyota dealer.
Page 172 2-4. Using other driving systems CAUTION ■ ABS does not operate effectively when ● Tires with inadequate gripping ability are used (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on the wet or slick road.
Page 173 In addition, make sure that the tires are inflated to the recom- mended tire pressure level. The ABS and VSC system will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause the system to malfunction.
Page 174: Driving Information Cargo And Luggage
2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. ● Stow cargo and luggage in the trunk whenever possible. ● Be sure all items are secured in place. ● Be careful to keep the vehicle level. Placing the weight as far for- ward as possible helps maintain vehicle balance.
Page 175 Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Toyota does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing. Example on your vehicle...
Page 176 2-5. Driving information CAUTION ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury. ● To prevent cargo and luggage from sliding forward during braking, do not stack anything in the enlarged trunk. Keep cargo and luggage low, as close to the floor as possible.
Page 177: Vehicle Load Limits
Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ■ Towing capacity Toyota does not recommend towing a trailer with your vehicle. ■ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
Page 178: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 179 2-5. Driving information ■ When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. ■ When parking the vehicle Park the vehicle and move the shift lever to P without setting the parking brake.
Page 180 2-5. Driving information ■ Tire chains Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires only. Do not install tire chains on rear tires.
Page 181 NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 182: Trailer Towing
Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your Toyota is not designed for trailer towing or for the use of tow hitch mounted carriers.
Page 183: Dinghy Towing
2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground.
Page 184 2-5. Driving information...
Page 185: Automatic Air Conditioning
3-1. Using the air conditioning system and defogger Automatic air conditioning system Air outlets are automatically selected and fan speed is automatically adjusted according to the temperature setting. Front passenger’s side temperature Air outlet display setting display Driver’s side temperature setting display Fan speed Change the air outlets used...
Page 186 3-1. Using the air conditioning system and defogger Using the automatic mode Press STEP The air conditioning system will begin to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting. Turning to the right increases the temperature and STEP turning to the left decreases the temperature on the...
Page 187 3-1. Using the air conditioning system and defogger ■ Adjusting the fan speed Press “∧” (increase) or “∨” (decrease) on the fan speed selector. The fan speed is shown on the display. (7 levels) Press to turn the fan off. ■...
Page 188 3-1. Using the air conditioning system and defogger Air flows to the feet and the windshield defogger operates. Recirculated air mode will auto- matically switch to outside air mode. ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) modes each time the button is pressed.
Page 189 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Center outlets Direct air flow to the left or right, up or down. Right and left side outlets Direct air flow to the left or right, up or down.
Page 190 3-1. Using the air conditioning system and defogger Steering wheel switches Some air conditioning features can be controlled using the switches on the steering wheel. Temperature selector “DUAL” button indicator on: Indi- vidual setting on the driver's side only. “DUAL” button indicator off:...
Page 191 There may be a problem in the air conditioning system if the indi- cator light continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. ■ Windshield air flow button When the “POWER”...
Page 192 The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision. ■ Plasmacluster™ Do not disassemble or repair the system because it contains high voltage parts. Call your Toyota dealer if the system needs repair.
Page 193 3-1. Using the air conditioning system and defogger NOTICE ■ To prevent the 12-volt battery from being discharged Do not leave the air conditioning system on longer than necessary when the hybrid system is off. ■ To prevent damage to the Plasmacluster™ Do not insert anything into the driver's side vent, attach anything to it, or use sprays around the drive's side vent.
Page 194: Rear Window And Outside Rear View Mirror Defoggers
3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Clear the rear window using the defogger. On/off The defoggers will automati- cally turn off the operation time. The operation time is between 15 minutes and 1 hour depending on the ambient temperature vehicle...
Page 195: 3-2. Using The Audio System
3-2. Using the audio system Audio system types With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Without navigation system Type A: CD player with changer controller and AM/FM radio Type B: CD player with changer and AM/FM radio...
Page 196 3-2. Using the audio system Title Page Using the radio P. 194 Using the CD player P. 201 Playing MP3 and WMA discs P. 209 ® Operating an iPod player P. 217 Operating a USB memory player P. 224 Optimal use of the audio system P.
Page 197 3-2. Using the audio system ■ Using cellular phones Interference may be heard through the audio system's speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. CAUTION ■ For vehicles sold in U.S.A. and Canada ●...
Page 198: Using The Radio
3-2. Using the audio system Using the radio Type A Power Volume Adjusting frequency (AM, FM mode) or channel (SAT mode) Scanning for Station selector receivable stations AM⋅SAT/FM Displaying radio text mode buttons messages Seeking the frequency Changing the channel Type B Power Volume...
Page 199 3-2. Using the audio system ® Setting station presets (excluding XM Satellite Radio) Search for desired stations by turning STEP ∧ pressing “ ” or “∨” on Press and hold a button (from or one of STEP ) until you hear a beep. Type B: Each time is pressed, station pages are changed.
Page 200 3-2. Using the audio system ■ Displaying radio text messages (for type B, FM mode only) When a new radio text message is received, “MSG” is shown on the display. To display the message, press If the text continues past the end of the display, “ ”...
Page 201 3-2. Using the audio system ■ Changing the channel category Press “∧” or “∨” on ® ■ Scanning XM Satellite Radio channels ● Scanning channels in the current category Press STEP When the desired channel is reached, press STEP again. ●...
Page 202 3-2. Using the audio system Type B: Each time is pressed, the display changes in the following order: Title (song/program title) → Title (song/program title)/Name (artist name/ feature). ■ When the battery is disconnected All preset stations are erased. (type A only) ■...
Page 203 ANTENNA securely. CHECK There is a short-circuit in the antenna or the sur- ANTENNA rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to XM Satellite Radio. The radio is being updated with the latest encryp- ®...
Page 204 3-2. Using the audio system The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel. ® Contact the XM Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada) ■...
Page 205: Using The Cd Player
3-2. Using the audio system Using the CD player Type A Power Volume CD eject Playback Selecting a track Searching playback Fast-forward Reverse Displaying text messages Repeat play Random playback Type B Power Volume CD eject Searching playback CD load Fast- forwarding reversing...
Page 206 3-2. Using the audio system Loading CDs ■ Loading a CD (type A) Insert a CD. ■ Loading a CD (type B) Press STEP When the indicator on the slot turns from amber to green, STEP insert a CD. ■ Loading multiple CDs (type B only) Press and hold until you hear a beep.
Page 207 3-2. Using the audio system Ejecting CDs ■ Ejecting a CD (type A) Press and remove the CD. ■ Ejecting a CD (type B) To select the CD to be ejected, press that corre- STEP sponds to “ ” or “ ”.
Page 208 3-2. Using the audio system Scanning tracks Press STEP The first ten seconds of each track will be played. To cancel, press again. Press again when the desired track is reached. STEP Selecting a CD (type B only) ■ Selecting a CD to play Press that corresponds to “...
Page 209 3-2. Using the audio system Random playback ■ Current CD Press (RAND) or that corresponds to “RDM”. Songs are played in random order. To cancel, press the same button until “OFF” is displayed. ■ All CDs (type B only) Press that corresponds to “RDM”...
Page 210 “WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. ■ Discs that can be used Discs with the marks shown below can be used.
Page 211 3-2. Using the audio system ■ CD player protection feature To protect the internal components, playback is automatically stopped when a problem is detected while the CD player is being used. ■ If CDs are left inside the CD player or in the ejected position for extended periods CDs may be damaged and may not play properly.
Page 212 3-2. Using the audio system NOTICE ● CDs with a transparent or translucent recording area ● CDs that have had tape, stickers or CD- R labels attached to them, or that have had the label peeled off ■ CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself.
Page 213: Playing Mp3 And Wma Discs
3-2. Using the audio system Playing MP3 and WMA discs Type A Power Volume Selecting a file CD eject Selecting a folder Playback Selecting a file Reversing Fast-forwarding Searching playback Repeat play Random playback Displaying text messages Type B Power Volume Selecting a file Disc eject...
Page 214 3-2. Using the audio system Loading and ejecting MP3 and WMA discs →P. 202 Selecting MP3 and WMA discs (type B only) →P. 204 Selecting and scanning a folder ■ Selecting folders one at a time Press “∧” or “∨” on to select the desired folder.
Page 215 3-2. Using the audio system Selecting and scanning files ■ Selecting one file at a time Turn or press “∧” or “∨” on select the desired file. ■ Selecting the desired file by cueing the files in the folder Press When the desired file is reached, press once again.
Page 216 3-2. Using the audio system Repeat play ■ Repeating a file Press (RPT) or that corresponds to “RPT”. To cancel, press the same button until the “OFF” is displayed. ■ Repeating all of the files in a folder (type B only) Type A: Press and hold (RPT) until you hear a beep.
Page 217 “WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played. ■ Discs that can be used →P.
Page 218 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 219 3-2. Using the audio system ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 220 3-2. Using the audio system ● MP3 and WMA playback When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played.
Page 221: Operating An Ipod ® Player
3-2. Using the audio system ® ∗ Operating an iPod player ® Connecting an iPod player enables you to enjoy music from the vehicle speakers. ® ■ Connecting an iPod player Open the cover and connect STEP ® an iPod player using an ®...
Page 222 3-2. Using the audio system Selecting a play mode ® Press that corresponds to “BROWSE” to select iPod STEP menu mode. Press that corresponds to the desired play mode. STEP ■ Play mode list First Second Third Fourth Play mode selection selection selection...
Page 223 3-2. Using the audio system ■ Selecting a list Turn to display the first selection list. STEP Press to select the desired item. STEP Pressing that corresponds to “MORE” changes to the second selection list. Repeat the same procedure to select the desired song name. STEP To return to the previous selection list, press that corresponds...
Page 224 3-2. Using the audio system Selecting songs Turn or press “∧” or “∨” on to select the desired song. Playing and pausing songs Press Fast-forwarding and reversing songs ∧ Press and hold “ ” or “∨” on Shuffle playback ■ Playing songs from one playlist or album in random order Press that corresponds to “RDM”.
Page 225 3-2. Using the audio system Switching the display Press Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time ® ■ About iPod ® iPod is registered trademarks of Apple computer, Inc.
Page 226 3-2. Using the audio system ■ Error messages ® “IPOD ERROR”: This indicates a problem in the iPod player, inside the USB box or the connection between them. “NO SONGS”: This indicates that there is no music data in the ®...
Page 227 3-2. Using the audio system CAUTION ■ Caution while driving ® Do not connect iPod players or operate the controls. NOTICE ® ■ To prevent damage to iPod players ® ● Do not leave iPod players in the vehicle. The temperature inside may become high, resulting in damage to the player.
Page 228: Operating A Usb Memory Player
3-2. Using the audio system ∗ Operating a USB memory player Connecting a USB memory player enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory player Open the cover and connect a STEP USB memory player. Press STEP ■...
Page 229 3-2. Using the audio system Selecting and scanning a folder ■ Selecting a folder Press “∧” or “∨” on to select the desired folder. ■ Returning to the first file of the first folder Press and hold “∨” on until you hear a beep. ■...
Page 230 3-2. Using the audio system Playing and pausing files Press Fast-forwarding and reversing files ∧ Press and hold “ ” or “∨” on Random playback ■ Playing files from a folder in random order Press that corresponds to “RDM”. To cancel, press the button twice. ■...
Page 231 3-2. Using the audio system Switching the display Press the Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time ■ USB memory player functions Depending on the USB memory player that is connected to the system, cer- tain functions may not be available.
Page 232 3-2. Using the audio system ■ USB memory player ● Compatible device USB memory players that can be used for MP3 and WMA playback. Depending on the type of USB device, playback may not be possible. ● Compatible device formats The following device formats can be used: •...
Page 233 3-2. Using the audio system ● MP3 file compatibility • Compatible standards MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz) •...
Page 234 3-2. Using the audio system ● Extensions If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
Page 235: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Type A Adjusting the sound quality and ASL Type B Adjusting the sound quality Menu button Selector buttons...
Page 236 3-2. Using the audio system Using the audio control function ■ Changing sound quality modes Type A Pressing selects the mode to be changed in the following order: “BAS”→“TRE”→“FAD”→“BAL”→“ASL” Type B Press STEP Press that corresponds to the desired mode. STEP “BASS”, “MID”, “TREB”, “FADE”...
Page 237 3-2. Using the audio system Type B Mode Sound qual- Turn to the Turn to the Level displayed ity mode left right BASS Bass* -5 to 5 Mid-range* -5 to 5 High TREB Treble* -5 to 5 Front/rear Shifts to FADE volume F7 to R7...
Page 238 3-2. Using the audio system Type B Press STEP Press that corresponds to “MORE”. STEP Press that corresponds to “ASL”. STEP Press that corresponds to “ON” or “OFF”. STEP ASL automatically adjusts the volume and tone quality according to vehi- cle speed.
Page 239 3-2. Using the audio system ■ Trademark owned by SRS Labs, Inc. (type A only) ® ® The audio systems utilize SRS FOCUS and SRS TruBass audio enhancement technologies, under license from SRS Labs, Inc., in all modes except AM radio mode. FOCUS, TruBass, SRS and symbols are trademarks of SRS Labs, Inc.
Page 240: Using The Aux Adapter
3-2. Using the audio system Using the AUX adapter This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. Open the cover and connect the portable audio device. STEP Type A Type B Press STEP...
Page 241 3-2. Using the audio system ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself. ■ When using a portable audio device connected to the power outlet Noise may occur during playback.
Page 242: Using The Steering Wheel Audio Switches
3-2. Using the audio system Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Increases/decreases vol- Radio mode: Select radio stations CD mode: Select tracks, files (MP3 and WMA) and discs ®...
Page 243 3-2. Using the audio system Turning the power on Press when the audio system is turned off. The audio system can be turned off by holding the switch down until you hear a beep. Changing the audio source Press when the audio system is turned on. The audio source changes as follows each time the switch is pressed.
Page 244 3-2. Using the audio system Selecting a track/file or folder ® Press to select the CD, iPod player or USB memory STEP player mode. Press “∨” or “∧” on to select the desired track/file. STEP Selecting a folder Press to select the MP3 and WMA mode. STEP Press and hold “∨”...
Page 245: Bluetooth ® Audio System
3-3. Using the hands-free phone system (for cellular phone) ® ∗ Bluetooth audio system ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. ®...
Page 246 3-3. Using the hands-free phone system (for cellular phone) ■ When transferring ownership of the vehicle Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 280) ® ■ About Bluetooth Bluetooth is a registered trademark of Bluetooth SIG.
Page 247 3-3. Using the hands-free phone system (for cellular phone) CAUTION ■ FCC WARNING Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regula- tions, must be used with a distance of at least 7.9in.
Page 248: Using The Bluetooth Audio System
3-3. Using the hands-free phone system (for cellular phone) ® Using the Bluetooth audio system ■ Audio unit Display A message, name, number, etc. is displayed. Lower-case characters and special characters cannot be displayed. Displays information that is too long to be displayed at one time on the display (press and hold) Selects items such as menu...
Page 249 3-3. Using the hands-free phone system (for cellular phone) Operating the system using voice commands By following voice guidance instructions output from the speaker, ® voice commands enable to the operation of the Bluetooth audio sys- tem without the need to check the display or operate ■...
Page 250 3-3. Using the hands-free phone system (for cellular phone) ® Using the Bluetooth audio system for the first time ® Before using the Bluetooth audio system, it is necessary to register ® a Bluetooth enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player: Press until “BT AUDIO”...
Page 251: Audio System
3-3. Using the hands-free phone system (for cellular phone) ® If the portable player has a Bluetooth phone, the phone can be reg- istered at the same time. (→P. 263) ® Menu list of the Bluetooth audio system ■ Normal operation Second First menu Third menu...
Page 252 3-3. Using the hands-free phone system (for cellular phone) ■ When using a voice command For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly. ■ Situations that the system may not recognize your voice ●...
Page 253: Operating A Bluetooth
3-3. Using the hands-free phone system (for cellular phone) ® Operating a Bluetooth enabled portable player Power Volume Selector knob Selecting an album Playback Playback/pause Fast-forwarding and reversing Displaying text messages Selecting an album Press “∨” or “∧” on Selecting tracks Press “∧”...
Page 254 3-3. Using the hands-free phone system (for cellular phone) Fast-forwarding and reversing tracks ∧ Press and hold “ ” or “∨” on Switching the display Press the Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time Using the steering wheel audio switches →P.
Page 255: Setting Up A Bluetooth ® Enabled Portable Player
3-3. Using the hands-free phone system (for cellular phone) ® Setting up a Bluetooth enabled portable player ® Registering a portable player in the Bluetooth audio system allows the system to function. The following functions can be used for reg- istered portable players: ■...
Page 256 3-3. Using the hands-free phone system (for cellular phone) Registering a portable player Select “Pair Audio Player” using a voice command or , and perform the procedure for registering a portable player. (→P. 246) Selecting a portable player to be used Select “Select Audio Player”...
Page 257 3-3. Using the hands-free phone system (for cellular phone) Changing the registered name of a portable player Select “Change Name” using a voice command or STEP Select the name of the portable player to be changed by STEP either of the following methods, and select “Confirm” using a voice command or a.
Page 258 3-3. Using the hands-free phone system (for cellular phone) Listing the registered portable players Select “List Audio Players” using a voice command or . The list of registered portable players will be read aloud. When listing is complete, the system returns to “BT•A Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available:...
Page 259 3-3. Using the hands-free phone system (for cellular phone) Deleting a registered portable player Select “Delete Audio Player (Delete Audio)” using a voice STEP command or Select the portable player to be deleted by either of the follow- STEP ing methods and select “Confirm” using a voice command or a.
Page 260: Bluetooth ® Audio System Setup
3-3. Using the hands-free phone system (for cellular phone) ® Bluetooth audio system setup ■ System setup items and operation procedures →P. 278...
Page 261: Using The Hands-Free Phone System (For Cellular Phone)
3-4. Using the hands-free phone system (for cellular phone) ∗ Hands-free phone system (for cellular phone) features ® This system supports Bluetooth , which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone.
Page 262 3-4. Using the hands-free phone system (for cellular phone) Title Page Using the hands-free phone system ■ Operating the system by using a voice command ■ Using the hands-free phone system for P. 261 the first time ■ Menu list of the hands-free phone sys- Making a phone call ■...
Page 263 3-4. Using the hands-free phone system (for cellular phone) ■ Conditions affecting operation The hands-free phone system may not operate normally in the following situ- ations: ● The cellular phone is turned off, or located outside the service area. ● The cellular phone has a low battery.
Page 264 3-4. Using the hands-free phone system (for cellular phone) CAUTION ■ FCC WARNING Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regula- tions, must be used with a distance of at least 7.9in.
Page 265 3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone) ■ Audio unit Display A message, name, phone number, etc. is displayed. Lower-case characters and special characters, such as an umlaut, cannot be dis- played.
Page 266 3-4. Using the hands-free phone system (for cellular phone) ■ Steering wheel Volume The voice guidance volume cannot be adjusted using this button. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch Turns the voice command...
Page 267 3-4. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker, voice commands enable to the operation of the hands-free phone system without the need to check the display or operate ■...
Page 268 3-4. Using the hands-free phone system (for cellular phone) Select “Pair Phone” using a voice command or STEP Register a phone name by either of the following methods. STEP a. Select “Record Name” by using , and say a name to be registered.
Page 269 3-4. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system ■ Normal operation Second First menu Third menu Operation detail menu Dialing a number stored in Callback the incoming call history memory Dialing a number stored in Redial the outgoing call history memory...
Page 270 3-4. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu Set PIN Setting a PIN code Phonebook Lock Locking the phone book Security Phonebook Unlocking the phone book Unlock Registering the cellular Pair Phone phone to be used Changing a registered name Change Name...
Page 271 3-4. Using the hands-free phone system (for cellular phone) ■ Using a short cut key First menu Second menu Operation detail Dialing a number registered Dial “XXX (name)” in the phone book Dial “XXX (number)” Dialing the input numbers Phone book add Adding a new number entry Changing the name of a...
Page 272 3-4. Using the hands-free phone system (for cellular phone) ■ Automatic volume adjustment When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. ■...
Page 273: Making A Phone Call
3-4. Using the hands-free phone system (for cellular phone) Making a phone call ■ Making a phone call ● Dialing by inputting a number “Dial by number” ● Dialing by inputting a name “Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory “Redial”...
Page 274 3-4. Using the hands-free phone system (for cellular phone) Dialing by inputting a name Press the talk switch and say “Dial by name”. STEP Select a registered name to be input by either of the following STEP methods: a. Press the talk switch and say a registered name. b.
Page 275 3-4. Using the hands-free phone system (for cellular phone) Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.
Page 276 3-4. Using the hands-free phone system (for cellular phone) The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” by using a voice command or Storing the number in the phone book: Select “Store” by using a voice command or Deleting: Select “Delete”...
Page 277: Setting A Cellular Phone
3-4. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below by using a voice command or ●...
Page 278 3-4. Using the hands-free phone system (for cellular phone) Selecting the cellular phone to be used Select “Select Phone” by using a voice command or STEP Pattern A Select the cellular phone to be used by either of the following STEP methods, and select “Confirm”...
Page 279 3-4. Using the hands-free phone system (for cellular phone) c. Select the desired phone name by using Press the talk switch or select “Record Name” by using STEP and say a new name. Select “Confirm” by using a voice command or STEP Listing the registered cellular phones Selecting “List Phones”...
Page 280 3-4. Using the hands-free phone system (for cellular phone) Deleting a cellular phone Select “Delete Phone” by using a voice command or STEP Select the cellular phone to be deleted by either of the follow- STEP ing methods and select “Confirm” by using a voice command a.
Page 281 3-4. Using the hands-free phone system (for cellular phone) Turning the hands-free phone automatic connection on/off ■ Turning off the automatic connection Select “Handsfree Power” by using a voice command or STEP Select “Turn off” by using a voice command or STEP ■...
Page 282: Security And System Setup
3-4. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure ● Setting or changing the PIN (Personal Identification Number) 1.
Page 283 3-4. Using the hands-free phone system (for cellular phone) ■ Changing the PIN Select “Set PIN” by using a voice command or STEP Enter the registered PIN by using a voice command or STEP Enter a new PIN by using a voice command or STEP When using , input the code 1 digit at a time.
Page 284 3-4. Using the hands-free phone system (for cellular phone) Setting voice guidance volume Select “Guidance Volume” by using STEP Change the voice guidance volume. STEP To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization Select “Initialize” and then “Confirm” by using STEP Select “Confirm”...
Page 285 3-4. Using the hands-free phone system (for cellular phone) ■ Initialization ● The following data in the system can be initialized: • Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code ●...
Page 286: Using The Phone Book
3-4. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: ● Adding a new phone number 1. “Phonebook” → 2. “Add Entry” ● Setting speed dial 1.
Page 287 3-4. Using the hands-free phone system (for cellular phone) ■ Adding procedure Select “Add Entry” by using a voice command or STEP Use one of the following methods to input a telephone num- STEP ber: Inputting a telephone number by using a voice command STEP2-1 Select “By Voice”...
Page 288 3-4. Using the hands-free phone system (for cellular phone) Inputting a phone number by using STEP2-1 Select “Manual Input” by using STEP2-2 Input a phone number by using , and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or incoming call history STEP2-1 Select “Call History”...
Page 289 3-4. Using the hands-free phone system (for cellular phone) Select the name to be registered by either of the following STEP methods, and select “Confirm” by using a voice command or a. Press the talk switch and say the desired name. b.
Page 290 3-4. Using the hands-free phone system (for cellular phone) Setting speed dials Select “Set Speed Dial (Speed Dial)” by using a voice com- STEP mand or Select the data to be registered as a speed dial by either of STEP the following methods: a.
Page 291 3-4. Using the hands-free phone system (for cellular phone) Changing a registered name Select “Change Name” by using a voice command or STEP Select the name to be changed by either of the following STEP methods. a. Press the talk switch, say desired name, and select “Con- firm”...
Page 292 3-4. Using the hands-free phone system (for cellular phone) Deleting registered data Select “Delete Entry” by using a voice command or STEP Select the data to be deleted by either of the following meth- STEP ods, and select “Confirm” by using a voice command or a.
Page 293 3-4. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting “List names” by using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available.
Page 294: 3-5. Using The Interior Lights
“DOOR” position, the light will go off automatically after 20 minutes. ■ Customization that can be configured at Toyota dealer Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features →P. 470)
Page 295: Interior Light
3-5. Using the interior lights Interior light Interior light Vehicles without moon roof Door position Vehicles with moon roof Door position...
Page 296: Personal Lights
3-5. Using the interior lights Personal lights Personal lights Front On/off Rear (vehicles with moon roof) On/off When either of the rear side doors is opened, the light on that side turns on automatically. Clos- ing the rear side doors will turn the lights off.
Page 297: 3-6. Using The Storage Features
3-6. Using the storage features List of storage features Auxiliary boxes Glove box Cup holders Console box...
Page 298: Glove Box
3-6. Using the storage features Glove box and console box Glove box Open (pull the lever) Lock with the mechanical key Unlock with the mechanical ■ Glove box light The glove box light turns on when the tail lights are turned on. CAUTION ■...
Page 299 3-6. Using the storage features Console box ■ When using the console box lid as an armrest (if equipped) If necessary, the console box lid can slide forward. Pull the lid forward by grasping the front of the lid. ■ Tray in the console box The tray slides forward/backward and can be removed.
Page 300: Cup Holders
3-6. Using the storage features Cup holders Cup holders Front Push the lid. Rear Pull the armrest down. ■ Using the cup holder (front) to store small items Remove the holder.
Page 301: Auxiliary Boxes
3-6. Using the storage features Cup holders and auxiliary boxes CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 302 3-6. Using the storage features Auxiliary boxes Front console Push the lid. Center console (type A) Push the lid. Center console (type B) Lift the lid.
Page 303 3-6. Using the storage features Auxiliary boxes ■ Cable pass-through The auxiliary box of the front console is provided with a hole that allows cables to be passed into the cabin from the inside power outlet and AUX or USB/AUX adapter.
Page 304: 3-7. Other Interior Features
3-7. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.
Page 305: Vanity Mirrors
3-7. Other interior features Vanity mirrors Slide the cover. The light turns on when the cover is opened. (if equipped)
Page 306: Clock
3-7. Other interior features Clock Adjusts the hour. Adjusts the minutes. ■ The clock is displayed when The “POWER” switch is in ACCESSORY or ON mode.
Page 307: Ashtray
3-7. Other interior features ∗ Ashtray An ashtray can be installed in a cup holder. (→P. 296) CAUTION ■ When not in use Keep the ashtray closed. Injuries may result in the event of sudden braking, sudden swerving or an accident.
Page 308: Power Outlet
3-7. Other interior features Power outlet The power outlet can be used for 12 V accessories that run on less than 10 A. Front console Center console ■ The power outlet can be used when The “POWER” switch is in ACCESSORY or ON mode. ■...
Page 309 3-7. Other interior features NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. ■...
Page 310: Seat Heaters
3-7. Other interior features ∗ Seat heaters Heats the left front seat Heats the right front seat The indicator light comes on. ■ The seat heaters can be used when The “POWER” switch is in ON mode. ■ When not in use Turn the seat heater off.
Page 311 3-7. Other interior features NOTICE ■ To prevent seat heater damage Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat. ■ To prevent the 12-volt battery from being discharged Turn the switches off when the hybrid system is off.
Page 312: Armrest
3-7. Other interior features Armrest Pull the armrest down for use. NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest.
Page 313: Floor Mat
3-7. Other interior features Floor mat Securely place a mat that matches the size of the space on the car- pet. Secure the driver's floor mat using the hooks provided. CAUTION ■ When inserting the floor mat Observe the following precautions. Failure to do so may result in the floor mat slipping and interfering with the movement of the pedals during driving, resulting in an accident.
Page 314: Trunk Features
3-7. Other interior features Trunk features ■ Grocery bag hooks Type A Type B...
Page 315: Cargo Net
3-7. Other interior features ■ Cargo net Type A Type B NOTICE ■ To prevent damage to the cargo net hooks Avoid hanging things other than a cargo net on them.
Page 316: Garage Door Opener
3-7. Other interior features ∗ Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manufac- ®...
Page 317 3-7. Other interior features ® ■ Programming HomeLink Point the remote control for the STEP device 1 to 3 in. (25 to 75 mm) ® from the HomeLink control but- tons. Keep indicator light ® HomeLink in view while pro- gramming.
Page 318 3-7. Other interior features Repeat the steps above to program another device for each of STEP ® the remaining HomeLink buttons. ■ Programming a Rolling Code system (for U.S. owners) If your device is Rolling Code equipped, follow the steps under the ®...
Page 319 ® the remaining HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. ■ Reprogramming a button ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 320 3-7. Other interior features ■ Before programming ● Install a new battery in the transmitter. ● The battery side of the transmitter must be pointed away from ® HomeLink ■ Certification for the garage door opener This device complies with Part 15 of the FCC Rules and with RSS-210 of the IC Rules.
Page 321: Compass
3-7. Other interior features ∗ Compass The compass on the anti-glare inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, press and hold “AUTO” for 3 seconds. ■...
Page 322 3-7. Other interior features Calibrating the compass The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in the illustration, the compass will deviate.
Page 323 3-7. Other interior features ■ Circling calibration Stop the vehicle in a place where it is safe to drive in a circle. STEP Press and hold “AUTO” for 9 STEP seconds. C appears on the compass dis- play. Drive the vehicle at 5 mph (8 km/ STEP h) or less in a circle until a direc- tion is displayed.
Page 324 3-7. Other interior features CAUTION ■ While driving the vehicle Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped. ■ When doing the circling calibration Be sure to secure a wide space, and watch out for people and vehicles in the neighborhood.
Page 325: 4-1. Maintenance And Care
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 326 4-1. Maintenance and care ■ To prevent deterioration and body corrosion ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads • If you see coal tar or tree sap on the paint surface •...
Page 327: 4-1. Maintenance And Care
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 328 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 329 4-1. Maintenance and care NOTICE ■ Cleaning detergents Do not use organic substances such as benzene or gasoline, acidic or alka- line solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ■...
Page 330: Maintenance Maintenance Requirements
It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 331 4-2. Maintenance ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 332: General Maintenance
“Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment...
Page 333: Vehicle Interior
4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be held securely Transmission “Park” mechanism on an incline with the shift lever in • Moves smoothly? • Does it have appropriate clear- Brake pedal ance and correct amount of free play?
Page 334: Vehicle Exterior
4-2. Maintenance Vehicle exterior Items Check points Door/trunk • Operate smoothly? Engine hood • The lock system works properly? • Is there any leakage after park- Fluid leaks ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? Tires •...
Page 335: Emission Inspection And Maintenance (I/M) Programs
If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■...
Page 336: 4-3. Do-It-Yourself Maintenance
(→P. 348) • Conventional wrench (for terminal clamp bolts) ⎯ Brake fluid level (→P. 346) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 337 4-3. Do-it-yourself maintenance Items Parts and tools Fuse with same amperage rating Fuses (→P. 373) as original Bulb with same number and watt- Light bulbs (→P. 383) age rating as original Radiator and condenser ⎯ (→P. 346) • Tire pressure gauge Tire inflation pressure (→P.
Page 338 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. ■ When working on the engine compartment ● Make sure that the indicator on the “POWER”...
Page 339: Hood
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the auxiliary catch lever STEP and lift the hood. CAUTION ■...
Page 340: Positioning A Floor Jack
4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. ■ Front ■ Rear...
Page 341 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri- ous injury: ● Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 342: Engine Compartment
4-3. Do-it-yourself maintenance Engine compartment Brake fluid reservoir Fuse box (→P. 373) (→P. 346) Condenser (→P. 346) Engine oil filler cap Electric cooling fans (→P. 341) Power control unit coolant Engine oil level dipstick radiator (→P. 346) (→P. 340) Washer fluid tank (→P. 347) Power control unit coolant Engine coolant reservoir reservoir...
Page 343 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After turning off the engine, STEP wait more than five minutes for the oil to drain back into the bottom of the engine.
Page 344 4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 345 1000 km) ● If you consume more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600 miles (1000 km), contact your Toyota dealer. ■ After changing the engine oil (U.S.A. only) To reset the oil change system, follow the procedure below: STEP Turn off the hybrid system with the trip meter A reading shown.
Page 346 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 347 4-3. Do-it-yourself maintenance Coolant The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the hybrid system is cold. Engine coolant reservoir Reservoir cap FULL If the level is on or below the “L” line, add coolant up to the “F”...
Page 348 If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, coolant reservoir caps, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. ■...
Page 349 Radiators and condenser Check the radiators and condenser and remove any foreign objects. If any of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION ■...
Page 350: Washer Fluid
4-3. Do-it-yourself maintenance NOTICE ■ If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high. If the reservoir needs frequent refilling, it may indicate a serious problem.
Page 351: 12-Volt Battery
4-3. Do-it-yourself maintenance 12-volt battery ■ Location The 12-volt battery is located in the right-hand side of the luggage compartment. ■ Removing the 12-volt battery cover Remove the 12-volt battery cover. ■ Exterior Make sure that the 12-volt battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps.
Page 352 With the shift lever in P and the “POWER” switch OFF, open and close the driver’s door, then attempt to start the hybrid system. If the system will not start even after multiple attempts at both methods, con- tact your Toyota dealer.
Page 353 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the 12-volt battery The 12-volt battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the 12-volt battery: ●...
Page 354 Use a 12-volt battery designed for the CAMRY HYBRID. Failure to do so may cause gas (hydrogen) to enter the passenger compartment, causing a fire or explosion. For replacement of the 12-volt battery, contact your Toyota dealer. NOTICE ■ When recharging the 12-volt battery Never recharge the 12-volt battery while the hybrid system is operating.
Page 355: Tires
■ The tire pressure warning system Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P. 400) The compact spare tire is not equipped with a tire pressure warn- ing valve and transmitter.
Page 356 ID codes must be registered in the tire pressure warning computer and tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (→P. 354) Initializing the tire pressure warning system ■...
Page 357 The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code of tire pressure warning valve and transmitter. Have the ID code registered by your Toyota dealer.
Page 358 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 359 Initialization can be completed in a few minutes. However, in the follow- ing cases, the settings has not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ●...
Page 360 4-3. Do-it-yourself maintenance ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 361 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification FCC ID: PAXPMV107J FCC ID: HYQ13BCX IC ID: 3729A-PMV107J IC ID: 1551A-13BCX For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 362 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted, or bias-ply tires).
Page 363 Repairing or replacing tires, wheels and tire pressure warning valves and transmitters When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. ■...
Page 364: Tire Inflation Pressure
4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (→P. 458) One of the following labels will be attached to the driver’s side center pillar.
Page 365 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the graduations of the gauge. STEP If the tire inflation pressure is not at the recommended STEP...
Page 366 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 367 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ●...
Page 368: Wheels
● Bent wheel that have been straightened ■ Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 369 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 370: Air Conditioning Filter
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be cleaned or changed regularly to maintain air conditioning efficiency. ■ Removal method Turn the “POWER” switch OFF. STEP Open the glove box. Slide off STEP the damper. Apply pressure to the glove STEP box as shown to disconnect the claws.
Page 371 2 minutes at 72 psi (500 kPa, 5.0 kgf/cm bar). If an air gun is not available, have the filter cleaned by your Toyota dealer. ■ Replacement method Remove the air conditioning filter and replace it with a new one.
Page 372 4-3. Do-it-yourself maintenance NOTICE ■ To prevent damage to the system ● When using the air conditioning system, make sure that a filter is always installed. ● When cleaning the filter, do not clean the filter with water.
Page 373: Key Battery
4-3. Do-it-yourself maintenance Key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with rag.) ●...
Page 374 ● The operational range is reduced. ■ Use a CR1632 lithium battery ● Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. ● Replace only with the same or equivalent type recommended by your Toyota dealer. ●...
Page 375 4-3. Do-it-yourself maintenance NOTICE ■ For normal operation after replacing the battery Observe the following precautions to prevent accidents. ● Always work with dry hands. Moisture may cause the battery to rust. ● Do not touch or move any other components inside the remote control. ●...
Page 376: Checking And Replacing Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the “POWER” switch OFF. STEP Open the fuse box cover. STEP Engine compartment Push the tab in and lift the lid...
Page 377 4-3. Do-it-yourself maintenance Take out the pullout tool. STEP Only type A fuse can be removed using the pullout tool. Check if the fuse has blown. STEP Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.
Page 378 4-3. Do-it-yourself maintenance Type C Normal fuse Blown fuse Contact your Toyota dealer. Fuse layout and amperage ratings ■ Engine compartment Fuse box cover...
Page 379 4-3. Do-it-yourself maintenance Fuse block Fuse Ampere Circuit SPARE 30 A Spare fuse SPARE 15 A Spare fuse SPARE 10 A Spare fuse RDI FAN 40 A Electric cooling fans CDS FAN 40 A Electric cooling fans RR DEF 50 A Rear window defogger, MIR HTR HTR SUB1 50 A...
Page 380 4-3. Do-it-yourself maintenance Fuse Ampere Circuit HTR, RR DEF, HTR SUB1, HTR SUB2, RDI FAN, CDS FAN, TAIL, PANEL, FR FOG, CIG, RADIO No.2, ECU-ACC, PWR OUTLET, GAUGE No.1, ECU-IG No.1, ECU- DC/DC 120 A IG No.2, H-LP LVL, WASH, A/C No.2, S-HTR, WIP, P/SEAT, DOOR No.2, POWER, RR DOOR LH, RR DOOR RH, ECU-B No.2, OBD,...
Page 381 4-3. Do-it-yourself maintenance Fuse Ampere Circuit IGCT 30 A Hybrid system ECU DOOR NO.1 25 A Main body ECU, power door lock RADIO NO.1 15 A Audio system, navigation system Front passenger occupant classifi- ECU-B NO.1 10 A cation system, main body ECU Gauges and meters, vanity lights, trunk light, “POWER”...
Page 382 4-3. Do-it-yourself maintenance ■ Under the instrument panel Fuse Ampere Circuit RR DOOR RH 25 A Rear right power window RR DOOR LH 25 A Rear left power window Fuel filter door opener, hybrid sys- FUEL OPN 7.5 A FR FOG 15 A Front fog lights 7.5 A...
Page 383 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 25 A Power windows DOOR NO.2 25 A Main body ECU S/ROOF 30 A Moon roof Front side marker/parking lights, stop/tail lights, rear side marker TAIL 15 A lights, license plate lights, front turn signal lights, main body ECU Navigation system, seat heaters, emergency flashers, air condition-...
Page 384 (→P. 383) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■ If there is an overload in the circuits The fuses are designed to blow before the entire wiring harness is damaged.
Page 385 Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire.
Page 386: Light Bulbs
You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 387 4-3. Do-it-yourself maintenance Replacing light bulbs ■ Headlights Turn the bulb base counterclock- STEP wise. Headlight (low beam) Headlight (high beam) Unplug connector while STEP depressing the lock release. Headlight (low beam) Headlight (high beam)
Page 388 4-3. Do-it-yourself maintenance ■ Rear turn signal lights Open the trunk lid and remove STEP the cover. Turn the bulb bases counter- STEP clockwise. Remove the light bulb. STEP...
Page 389 ■ LED stop/tail lights and high mounted stoplight The stop/tail lights and high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
Page 390 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Turn off the headlights. Do not attempt to replace the bulb immediately after turning off the headlights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. Hold the bulb by the plastic or metal portion.
Page 391 4-3. Do-it-yourself maintenance...
Page 392: 5-1. Essential Information
5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when the hybrid system is not operating.
Page 393: If Your Vehicle Needs To Be Towed
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 394 5-1. Essential information Towing with a sling-type truck NOTICE ■ To prevent body damage Do not tow with a sling-type truck, either from the front or rear. Towing with a wheel-lift type truck from the front Release the parking brake. NOTICE ■...
Page 395 5-1. Essential information Towing with a wheel-lift type truck from the rear Use a towing dolly under the front wheels. NOTICE ■ To prevent causing serious damage to the transmission Never tow this vehicle from the rear with the front wheels on the ground. Using a flat bed truck If you use chains or cables to tie down your vehicle, the angles...
Page 396: If You Think Something Is Wrong
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 397: Event Data Recorder
5-1. Essential information Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or a near car crash event.
Page 398 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third party except when: ● An agreement from the vehicle's owner (or the leasing company for a leased vehicle) is obtained ●...
Page 399: Steps To Take In An Emergency If A Warning Light Turns On Or A Warning Buzzer Sounds
Stop the vehicle immediately. The following warning indicates the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Charging system warning light...
Page 400 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: (U.S.A.)
Page 401 Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. ■...
Page 402 When the light comes on: Adjust the tire inflation Low tire inflation pressure. pressure. (U.S.A.) When the light comes on after blinking for 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer. pressure warning system.
Page 403 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Master warning light A buzzer sounds and the warning light comes on →P. 406 and flashes to indicate that the master warning system has detected a malfunc- tion.
Page 404 If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. ● If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
Page 405 The vehicle speed linked seat belt reminder buzzer can be disabled. (Customizable features →P. 470) However, Toyota recommends that the seat belt reminder buzzer be opera- tional to alert the driver and front passenger that the seat belts are not fas- tened.
Page 406 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 407 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light).
Page 408: If A Warning Message Is Displayed
Multi-information display If any of the warning lights turns on again after performing the fol- lowing actions, contact your Toyota dealer.
Page 409 Stop the vehicle immediately. ● The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning message Details Indicates an abnormal engine oil pressure.
Page 410 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning message Details Indicates a malfunction in the steering lock sys- tem.
Page 411 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning message Details Correction procedure Indicates that one or more of the doors is not fully closed.
Page 412 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the parking brake is still engaged with the vehicle having Release the parking reached a speed of brake. more than 3 mph (5 km/h). A buzzer also sounds. Indicates that the washer fluid level is Add washer fluid.
Page 413 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the hybrid battery (trac- Stop the vehicle and tion battery) is low. shift the shift lever to P. A buzzer also sounds. Indicates that the transmission is not in Shift the shift lever to P P when attempting to before pressing the...
Page 414 Messages displayed when refueling The following messages are displayed after the fuel lid opener is pressed. If the messages do not change or are displayed continu- ously, have the vehicle checked by your Toyota dealer. Message Details Preparing the vehicle for refueling.
Page 415 5-2. Steps to take in an emergency Other messages If the following message is displayed, take appropriate action and confirm that the message has disappeared. Message Details The driver’s door is opened when the transmis- sion is not in P with the hybrid system on. Shift the shift lever to P.
Page 416 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details procedure buzzer buzzer Indicates that a door other than the driver’s door has been opened and closed with the Confirm the “POWER” 3 times location of the Once switch in any electronic key.
Page 417 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details procedure buzzer buzzer Indicates that the driver’s door has been opened and closed (with the • Shift the shift shift lever not in lever to P. P, the “POWER” Continuous Continuous •...
Page 418 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details procedure buzzer buzzer ⎯ Once Indicates that the electronic →P. 432 key does not operate prop- ⎯ erly. Once Indicates that Press the the steering “POWER” lock has not switch again released within while turning...
Page 419: If You Have A Flat Tire
5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ●...
Page 420 5-2. Steps to take in an emergency Taking out the jack and spare tire Remove the luggage floor cover. STEP Loosen the nut and remove it. STEP Remove the spare tire cover. Loosen the bolt and remove it. Remove the jack tray. Remove the hook.
Page 421 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP Wheel Flat tire chock posi- tions Behind the Left- rear right- hand hand side side tire Front Behind the Right- rear left- hand hand side side tire In front of...
Page 422 5-2. Steps to take in an emergency Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. Raise the vehicle until the tire is STEP slightly raised off the ground. Remove all the wheel nuts and STEP the tire.
Page 423 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 424 5-2. Steps to take in an emergency Lower the vehicle. STEP Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the flat tire, tire jack and all tools. STEP ■...
Page 425 5-2. Steps to take in an emergency ■ If you have a flat front tire on a road covered with snow or ice Install the compact spare tire on the rear of the vehicle. Perform the fol- lowing steps and fit tire chains to the front tires. Replace a rear tire with the compact spare tire.
Page 426 5-2. Steps to take in an emergency CAUTION ● Do not raise the vehicle while someone is in it. ● When raising the vehicle, do not put an object on or under the jack. ● Do not raise the vehicle to a height greater than that required to replace the tire.
Page 427 5-2. Steps to take in an emergency CAUTION ■ Speed limit when using the compact spare tire Do not drive at speeds in excess of 50 mph (80 km/h) when a compact spare tire is installed on the vehicle. The compact spare tire is not designed for driving at high speeds. Failing to observe this precaution may lead to an accident causing death or seri- ous injury.
Page 428 ■ When replacing the tires When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. ■...
Page 429: If The Hybrid System Will Not Start
5-2. Steps to take in an emergency If the hybrid system will not start Reasons for the hybrid system not starting vary depending on the situation. Check the following and perform the appropriate proce- dure: ■ The hybrid system will not start, even though the correct starting procedure is being followed.
Page 430 ● The 12-volt battery may be discharged. (→P. 434) ● There may be a malfunction in the steering lock system. Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function...
Page 431: If The Shift Lever Cannot Be Shifted From P
(a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 432: If You Lose Your Keys
5-2. Steps to take in an emergency If you lose your keys New genuine Toyota keys can be made by your Toyota dealer using the other key and the key number stamped on your key number plate.
Page 433: If The Electronic Key Does Not Operate Properly
5-2. Steps to take in an emergency If the electronic key does not operate properly If communication between the electronic key and the vehicle is inter- rupted (→P. 41) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote con- trol cannot be used.
Page 434 Changing “POWER” switch modes and starting the hybrid system Shift the shift lever to P and apply the brakes. STEP Touch the Toyota emblem side of STEP electronic “POWER” switch. If any of the doors is opened and closed and while the key is touched to the “POWER”...
Page 435 5-2. Steps to take in an emergency ■ Stopping the hybrid system Shift the shift lever to P and press the “POWER” switch as you normally do when stopping the hybrid system. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.
Page 436: If The Vehicle's 12-Volt Battery Is Discharged
You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below. Open the trunk lid and remove the 12-volt battery cover.
Page 437 “POWER” switch to ON mode, then start the hybrid sys- tem. Make sure the “READY” indicator comes on. If the indicator does not comes on, contact your Toyota dealer. Once the hybrid system has started, remove the jumper STEP cables in the exact reverse order in which they were con- nected.
Page 438 5-2. Steps to take in an emergency CAUTION ■ Avoiding 12-volt battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the 12-volt battery. ● Make sure each jumper cable is connected to the correct terminal. ●...
Page 439 5-2. Steps to take in an emergency NOTICE ■ When handling jumper cables Be careful that the jumper cables do not become tangled in the cooling fans or any of the belts when connecting or disconnecting them.
Page 440: If Your Vehicle Overheats
If the fans are operating: Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the hybrid system. If the fans are not operating: Stop the hybrid system immediately and call your Toyota dealer.
Page 441 If the fans are operating: Wait until “HYBRID SYSTEM OVER HEAT” disappears and then stop the hybrid system. If the message does not disappear, call your Toyota dealer. If the fans are not operating: Stop the hybrid system immediately and call your local...
Page 442 Water can be used in an emer- gency if power control unit cool- ant is unavailable. (→P. 450) Have the vehicle checked at the nearest Toyota dealer as soon as possible. ■ Overheating The following symptoms may occur when your vehicle is overheating: ●...
Page 443 5-2. Steps to take in an emergency CAUTION ■ To prevent an accident or injury when inspecting under the hood of your vehicle ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided. The engine compartment may be very hot, caus- ing serious injury such as burns.
Page 444: If The Vehicle Becomes Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. Stop the hybrid system. Set the parking brake and put the STEP shift lever in P.
Page 445 5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels. ● If the vehicle remains stuck after trying these procedures, the vehicle may require towing to be freed.
Page 446 5-2. Steps to take in an emergency...
Page 447: Specifications Maintenance Data (Fuel, Oil Level, Etc.)
Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the...
Page 448 6-1. Specifications This number is also on the Certi- fication label on the driver’s side center pillar. ■ Gasoline engine number and electric motor (traction motor) number The gasoline engine number and electric motor (traction motor) num- ber are stamped as shown. Gasoline engine number Electric motor (traction motor) number...
Page 449 6-1. Specifications Engine Model 2AZ-FXE engine Type 4 cylinder in-line, 4 cycle, gasoline 3.48 × 3.78 in. (88.5 × 96.0 mm) Bore and stroke Displacement 144.1 cu.in. (2362 cm Drive belt tension Automatic adjustment Valve clearance (engine cold) 0.007 ⎯ 0.011 in. (0.19 ⎯ 0.29 mm) Intake 0.015 ⎯...
Page 450: Lubrication System
4.3 qt. (4.1 L, 3.6 Imp. qt.) ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC multigrade engine oil...
Page 451: Cooling System
Power control 3.1 qt. (2.9 L, 2.6 Imp. qt.) unit Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non-silicate, Coolant type non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology...
Page 452: Ignition System
6-1. Specifications Ignition system Spark plug Make DENSO SK20R11 NGK IFR6A11 0.043 in. (1.1 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust spark plug gap. Electrical system 12-volt battery 12.6 ⎯ 12.8 V Fully charged 12.2 ⎯...
Page 453 Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the transmission of your vehicle. Brakes Pedal clearance 3.1 in.
Page 454 6-1. Specifications Tires and wheels Tire size P215/60R16 94V, T155/70D17 110M Driving under normal conditions Front: 32 psi (220 kPa, 2.2 kgf/cm bar)* Rear: 32 psi (220 kPa, 2.2 kgf/cm bar)* Spare: 60 psi (420 kPa, 4.2 kgf/cm Tire inflation pressure bar) (Recommended cold tire *: When driving at high speeds above...
Page 455 6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights ⎯ Low beam High beam 9005 Front side marker/ ⎯ parking lights ⎯ Front turn signal lights Exterior ⎯ Rear turn signal lights ⎯ License plate lights Back-up lights Front fog lights ⎯...
Page 456: Fuel Information
ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■...
Page 457 Toyota allows the use of oxygenate blended gasoline where the oxygen- ate content is up to 10% ethanol or 15% MTBE. ● If you use gasohol in your Toyota, be sure that it has an octane rating no lower than 87. ●...
Page 458 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s catalytic converters causing the emission control system to malfunction.
Page 459: Tire Information
6-1. Specifications Tire information Typical tire symbols Standard tire Compact spare tire Tire size (→P. 461) DOT and Tire Identification Number (TIN) (→P. 460) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators (→P.
Page 460 6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL”...
Page 461 6-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer's identifica- tion mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal...
Page 462 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 or 3 digits) Speed symbol...
Page 463 U.S.A. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 464 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1-1/2) times as well on the government course as a tire graded 100.
Page 465 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire fail- ure.
Page 466 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 467 6-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 468 6-1. Specifications Tire related term Meaning The parting of the innerliner from cord material Innerliner separation in the carcass (a) The sidewall that contains a whitewall, bears white lettering, or bears manufac- turer, brand, and/or model name molding that is higher or deeper than the same Intended outboard molding on the other sidewall of the tire, or sidewall...
Page 469 6-1. Specifications Tire related term Meaning A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load...
Page 470 6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indicators designed to give a visual indication of the...
Page 471: 6-2. Customization
Your vehicle includes a variety of electronic features that can be per- sonalized to your preferences. Programming these preferences requires specialized equipment and may be performed by your Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer. Customized Item Function Default setting...
Page 472 6-2. Customization Customized Item Function Default setting setting Wireless remote control Driver's door unlocked in one All doors Unlocking operation step, all doors unlocked in one unlocked in two step. steps Automatic door lock function to be activated if door is not opened after being unlocked Time elapsed before 30 seconds...
Page 473 6-2. Customization Customized Item Function Default setting setting Driver's door unlocked in one All doors Unlocking using a key step, all doors unlocked in one unlocked in two step. steps Speed-detecting auto- matic door lock function Door lock → P. 51) Opening driver's door unlocks all doors Shifting gears to P...
Page 474: Initialization Items To Initialize
6-3. Initialization Items to initialize The following items must be initialized for normal system operation in cases such as after the 12-volt battery is reconnected, or mainte- nance is performed on the vehicle. Item When to initialize Reference Engine oil mainte- After changing engine oil P.
Page 475 6-3. Initialization...
Page 476: Reporting Safety Defects For U.s. Owners
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 477: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 478 Guide de confort de ceinture de sécurité (siège arrière extérieur) Si la sangle diagonale gêne la personne au niveau du cou, utilisez le guide confort de la ceinture de sécurité. Sortez le guide confort de sa ÉTAPE poche. Engagez la ceinture dans le ÉTAPE guide.
Page 479 ■ Ceintures de sécurité arrière Si la ceinture de sécurité est sortie de son guide, repassez-la dedans avant de l'utiliser. Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède. Profitez de l'occasion pour vérifier régulièrement que les ceintures ne sont pas effilochées, entaillées, ou ne paraissent pas exagérément usées.
Page 481: Alphabetical Index
Alphabetical index Alphabetical index A/C ..........182 Audio system ABS........... 165 Antenna.........198 Air conditioning filter....367 Audio input ......236 Air conditioning system AUX adapter......236 Air conditioning filter ..... 367 CD player/changer ....201 Automatic air conditioning MP3/WMA disc......209 system........ 182 Optimal use ......231 Airbags Portable music player....236 Airbag operating conditions..
Page 482 Alphabetical index Back-up lights Care Wattage.........454 Exterior........322 Battery Interior........324 Checking .......348 Seat belts ......325 Hybrid battery Cargo capacity ......169 (traction battery)....25 Cargo net ........310 If the vehicle has discharged CD changer....... 201 12-volt battery .....434 CD player ........
Page 483 Alphabetical index Child safety Daytime running light Airbag precautions ....99 system ........156 Child restraint system... 109 Defogger Child-protectors ...... 52 Rear window ......190 How your child should wear Side mirror......190 the seat belt ......67 Dimension.........446 Installing child restraints ..113 Dinghy towing ......178 Moon roof precautions....
Page 484 Alphabetical index “ECO HEAT/COOL” switch ..182 Engine Electronic key Compartment ......339 If your electronic key Engine switch ....... 135 battery is discharged...431 Hood ........336 Electric power steering ...165 How to start the Emergency flashers hybrid system ..... 135 Switch........390 Identification number.....
Page 485 Alphabetical index Floor mat........309 Hands-free phone system Fluid (for cellular phone) Brake ........346 Hands-free phone system Washer ......... 347 (for cellular phone)....257 Front passenger occupant Hazard lights classification system.... 104 Switch........390 Front passenger's seat belt Head restraints reminder light......400 Adjusting ........61 Front seats Headlights...
Page 486 Alphabetical index Jack Maintenance Positioning a floor jack ..337 Do-it-yourself Vehicle-equipped jack ...417 maintenance ....... 333 Jack handle ......417 General maintenance.... 329 Maintenance data ....446 Maintenance requirements ... 327 Keyless entry......48 Meter Keys Instrument panel light Electronic key......35 control......... 145 If you lose your keys .....430 Meters ........
Page 487 Alphabetical index Parking brake ......142 Seat belts Parking lights Adjusting the seat belt.....63 Switch........154 Automatic Locking Retractor ...66 Wattage ........ 454 Child restraint system Personal lights installation......113 Switch........292 Cleaning and maintaining Wattage ........ 454 the seat belts ......325 Power outlet......
Page 488 Alphabetical index Service reminder Steering indicators ......147 Column lock release ..... 137 Shift lever Steering wheel If the shift lever cannot Adjustment ......71 be shifted from P....429 Air conditioning system Transmission......139 switches......187 Shift lock system .....429 Audio switches ...... 238 Side airbags........92 Storage feature ......
Page 489 Alphabetical index Tachometer......144 Tools .........417 Tail lights Total load capacity....172 Switch........154 Towing Theft deterrent system Dinghy towing......178 Immobilizer system....87 Trailer towing......177 Theft prevention labels..... 89 TRAC .........165 Tire inflation pressure .... 361 Traction control......165 Tire information Transmission Glossary .......
Page 490 Alphabetical index Vanity lights Warning messages Vanity lights......301 Engine coolant Wattage.........454 temperature ......407 Vanity mirrors......301 Engine oil maintenance..409 VDIM ..........165 Engine oil pressure ....407 Vehicle dynamics integrated Hybrid system ....... 407 management ......165 Moon roof......409 Vehicle identification Open door ......
Page 491 Alphabetical index Windshield wipers....159 Wireless remote control key Replacing the battery ... 370 Wireless remote control..48 WMA disc ......... 209...
Page 492: What To Do If
What to do if... What to do if... If you have a flat tire A tire is punctured P. 417 P. 427 If the hybrid system will not start P. 87 Immobilizer system The hybrid system does not start P. 434 If the 12-volt battery is discharged If the electronic key does not oper- P.
Page 493 What to do if... ■Warning lights Brake system warning Tire pressure warning light (red indicator) light P. 400 Open door warning light P. 397 P. 400 Charging system warn- Low fuel level warning ing light light P. 397 P. 400 Malfunction indicator Driver’s seat belt lamp...
Page 494: Gas Station Information
GAS STATION INFORMATION Auxiliary catch lever Trunk opener Fuel filler door P. 336 P. 55 P. 82 Hood lock release lever Fuel filler door opener Tire inflation pressure P. 336 P. 82 P. 453 Fuel tank capacity 17.2 gal. (65 L, 14.3 Imp. gal.) Fuel type Unleaded gasoline only P.

Toyota 2010 Camry Hybrid Quick Reference Manual

Quick Links

QUICK REFERENCE

Related Manuals for Toyota 2010 Camry Hybrid

Summary of Contents for Toyota 2010 Camry Hybrid