Hw Setup - Toshiba Satellite C670 Series User Manual

Supervisor Password
If you set a Supervisor Password, some functions might be restricted when
a user logs on with the User Password. To set a Supervisor Password,
click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Assist -
> SECURE -> Supervisor password.
This utility lets you do the following:
Starting the computer by password
To start up the computer with the user password, follow the steps as
detailed below:
1.
2. At this point, the hotkeys FN + F1 to F9 do not work. They will function after
you enter the password.
3.
4.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.

HW Setup

This section explains how to use the TOSHIBA HW Setup program to
configure your computer, and provides information on settings for various
functions.
Accessing HW Setup
To run the HW Setup program, click Start -> All Programs -> TOSHIBA ->
Utilities -> HWSETUP.
User's Manual
Owner String (text box)
You can use this box to associate text with the password. After you
enter text, click Apply or OK. When the computer is started, this text
will be displayed together with the prompt asking you to enter a
password.
Register or delete the Supervisor Password.
Specify restrictions for general users.
Turn on the power as described in Chapter 1,
following message will appear in the screen:
Enter Password [ ]
Enter the Password.
Press ENTER.
Getting Started. The
4-14