Changing The Way You Are Warned; Report Button; Reporting A New Safety Camera While On The Move - TomTom Blue&Me- Owner's Manual

• The type of safety camera and your distance from the camera location is shown in the
Driving View. If a speed restriction has been reported for the camera, the speed is also
shown in the Driving View.
• The location of the safety camera is shown on the map.
Note: For average speed safety cameras, you are warned by a combination of icons and
sounds at the start, middle and end of the average speed check zone. For more informa-
tion, see: Changing the way you are warned.

Changing the way you are warned

To change the way your Blue&Me-TomTom warns you about safety
cameras, tap the Change warning preferences button.
You can then set how close you want to be to a safety camera before
Change
you are warned and what type of sound will be played.
warning
preferences
For example, to change the sound that is played when you approach a
fixed safety camera, do the following:
1. Tap TomTom Safety Cameras in the Main Menu.
2. Tap Change warning preferences.
A list of safety camera types is displayed. A speaker is shown next
to the speed camera types that have been set for an alert.
3. Tap Fixed safety cameras.
4. Tap NO to avoid removing the fixed safety camera alerts.
5. Enter the time in seconds for when a warning is given before you
reach a camera. Then tap OK.
6. Tap the sound you want to be used for the warning. For example, to
select a bugle sound tap on Bugle.
Tips: To switch off warning sounds for a camera type, tap Silence
instead of Bugle in step 6 above. To record your own warning sound
for a camera type, tap Record warning instead of Bugle in step 6
above.
7. Tap YES to save your changes.

Report button

To show the report button in the Driving View, do the following:
1. Tap Services in the Main Menu.
2. Tap Safety Alerts.
3. Tap Enable report button.
The report button is shown on left-hand side of the Driving View or if you are already
using the quick menu, it's added to the buttons available in the quick menu.

Reporting a new safety camera while on the move

1. Tap the report button shown in the Driving View or in the quick menu to record the loca-
tion of the camera.
If you tap the report button within 20 seconds of receiving a safety camera warning, you
get the option to add a camera or remove a camera. Tap Add camera.
72