Blue&Me Controls; Steering Wheel Controls; Cluster Display - TomTom Blue&Me- Owner's Manual

3. Blue&Me controls

Steering wheel controls

Blue&M
e con-
trols
You can control some functions on your Blue&Me-TomTom navigation device using the
buttons on the car steering wheel. To do this, press MAIN/MENU, then use the arrow keys
to highlight Satnav, then press SRC/OK.
Press one of these buttons to open selected items in the menu or to select
or clear checkboxes.
MAIN
or
MENU
Press this button to return to the Driving View and to stop using the steer-
ing wheel buttons to control the navigation device.
Press one of these buttons to move up or down a list or menu.
Note: The remaining buttons are used for specific Blue&Me functions, for controlling the
volume of the radio and incoming calls, and to activate Blue&Me voice commands.
A message is displayed on your navigation device if you try to do something which is not
supported by the steering wheel buttons. To control these functions on your device, tap
the screen or use voice command and control. For more information, see the chapter on
Voice command and control.

Cluster display

Note: Not all cars support showing navigation instructions in the cluster display.
Navigation instructions from your Blue&Me-TomTom navigation device are shown in your
car's cluster display.
The display shows the next navigation instruction, the distance to next navigation instruc-
tion and the name of the next street.
You can switch the navigation instructions in the cluster display on or off in the Blue&Me-
TomTom Preferences menu, on page 2/2, with the option Show guidance on car display.
6