TomTom Blue&Me- Owner's Manual page 42

19. Voice command and control
There are two types of voice command and control.
Voice
com-
mand
and
control
The first type is provided by Blue&Me and you can use it to control Blue&Me features. You
do this using a button on your steering wheel.
The second type is provided by your navigation device and you can use it to plan routes
and control other features of your navigation device. You do this by initially tapping the
screen on the navigation device.
Navigation device voice command and control
Instead of tapping the screen to control your Blue&Me-TomTom navigation device, you
can give instructions to your device using your voice. For example, to increase the vol-
ume, you can say, "Increase volume."
Tap the microphone button in the Driving View on your Blue&Me-TomTom
device to start using voice command and control.
Important: To use command and control on your navigation device, you must have a
computer voice installed on your Blue&Me-TomTom device. You can install computer
voices using TomTom HOME.
To view the list of available commands, tap Command and control in the Preferences
menu and then tap What can I say?
Using voice command and control
Note: You must select a computer voice in order to use voice command and control. To
select a computer voice, tap Voices in the Preferences menu, then tap Change voice.
Select a computer voice.
In this example, you will use voice command and control to plan a journey to your Home
address.
1. Tap the microphone button in the Driving View.
Note: To add or remove this button from the Driving View, tap Command and
control in the Preferences menu, then tap Enable command and control or Disable com-
mand and control.
The microphone monitor is shown in colour, unless command and control is busy with
another task.
2. When you hear a beep, say, "Navigate to Home."
When you speak, the microphone monitor shows if you are talking too loudly or quietly:
42