Supermicro Supero X7DCA-L User Manual page 59

Ultra DMA Mode
This option allows the user to select Ultra DMA Mode for the slot specified.
The options are Disabled, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and
Mode 5.
Serial ATA
This setting allows the user to enable or disable the function of Serial ATA. The
options are Disabled and Enabled.
Native Mode Operation
Select the native mode for ATA. The options are: Serial ATA and Auto.
SATA Controller Mode Option
Select Compatible to allow the SATA and PATA drives to be automatically-
detected and be placed in the Legacy Mode by the BIOS. Select Enhanced
to allow the SATA and PATA drives to be to be automatically-detected and be
placed in the Native IDE Mode. (Note: The Enhanced mode is supported by
the Windows 2000 OS or a later version.)
When the SATA Controller Mode is set to "Enhanced", the following items
will display:
Serial ATA (SATA) RAID Enable
Select Enable to enable Serial ATA RAID Functions. (For the Windows OS
environment, use the RAID driver if this feature is set to Enabled. When this
item is set to Enabled, the item: "ICH RAID Code Base" will be available for
you to select either Intel or Adaptec Host RAID firmware to be activated. If
this item is set to Disabled, the item-SATA AHCI Enable will be available.)
The options are Enabled and Disabled.
ICH RAID Code Base
Select Intel to enable Intel's SATA RAID firmware. Select Adaptec to use
the Adaptec HostRAID utility. The options are Intel and Adaptec.
SATA AHCI Enable
Select Enable to enable the function of Serial ATA Advanced Host Interface.
(Take caution when using this function. This feature is for advanced program-
mers only. The options are Enabled and Disabled.)
4-5
Chapter 4: BIOS