Fostex DV40 Operation Manual page 157

Pin 5: <<
The "low" pulse activates the function equivalent to the [|<<] key.
* The minimum effective input pulse width is 15 milliseconds (except Pin 2 [PLAY]
whose minimum pulse width is 5 milliseconds).
GPI OUT
Pin 1: GND
Pin 2: EVENT 1
Outputs the event of CUE POINT 1
Pin 3: EVENT 0
Outputs the event of CUE POINT 0
Pin 4: EVENT 2
Outputs the event of CUE POINT 2
Pin 5: EVENT 3
Outputs the event of CUE POINT 3
* A 60-msec width low level pulse can be output from each event output during play
back or recording.
TIME CODE INPUT
• Connector
• Format
• Nominal input
• Transmission rate
• Input impedance
• Minimum input level
TIME CODE OUTPUT
• Connector
• Format
• Nominal input
• Output impedance
• Applicable load impedance
TIME CODE THRU
• Connector
* Directly feeds the timecode received from the TIME CODE INPUT connector.
VIDEO INPUT
• Connector
• Nominal input level
VIDEO THRU
• Connector
* Directly feeds the video signal received from the VIDEO INPUT connector.
WORD INPUT
• Connector
• Nominal input level
WORD OUTPUT
• Connector
• Nominal output level
WORD THRU
• Connector
* Directly feeds the word clock received from the WORD INPUT connector.
: XLR-3-31 type (balanced, pin 2: hot)
: SMPTE/EBU
: 2 V p-p
: 2.4 kbit/sec (SMPTE)
: 20k or more
: 0.25 V p-p
: XLR-3-32 type (balanced, pin 2: hot)
: SMPTE/EBU
: 2 V p-p
: 1k or less
: 600 or more
: XLR-3-32 type (balanced, pin 2: hot)
: BNC type
: 1 V p-p (* with 75
: BNC type
: BNC type
: TTL level (* with 75
: BNC type
: TTL level
: BNC type
17-3
termination switch)
termination switch)