Fortinet 548B Administration Manual page 88

7.2.6.3 ip igmp snooping fast-leave
The user can go to the CLI Global/Interface Configuration Mode to set IGMP Snooping fast-leave admin
mode on a selected interface or all interfaces, use the ip igmpsnooping fast-leave global/interface
configuration command. Use the no ip igmp snooping fast-leave disable IGMP Snooping fast-leave
admin mode.
Syntax
ip igmp snooping fast-leave
no ip igmp snooping fast-leave
Default Setting
Disabled
Command Mode
Global Config
Interface Config
7.2.6.4 ip igmp snooping groupmembershipinterval
The user can go to the CLI Global/Interface Configuration Mode to set the IGMP Group Membership
Interval time on one interface or all interfaces, use the ip igmp snooping groupmembershipinterval
<2-3600> global/interface configuration command. Use the no ip igmp snooping
groupmembershipinterval return to default value 260.
Syntax
ip igmp snooping groupmembershipinterval <2-3600>
no ip igmp snooping groupmembershipinterval
<2-3600> -- This value must be greater than the IGMPv3 Maximum Response time value. The range
is 2 to 3600 seconds.
Default Setting
260
Command Mode
Global Config
Interface Config
- 88 -