Fortinet 548B Administration Manual page 480

Preferences: Displays the preference of the address as a default router address, relative to other
router addresses on the same subnet.
8.6.2 Configuration Commands
8.6.2.1 ip irdp
This command enables Router Discovery on an interface.
Syntax
ip irdp
no ip irdp
<no> - Disable Router Discovery on an interface.
Default Setting
Disabled
Command Mode
Interface Config
8.6.2.2 ip irdp broadcast
This command configures the address to be used to advertise the router for the interface.
Syntax
ip irdp broadcast
no ip irdp broadcast
broadcast - The address used is 255.255.255.255.
no - The address used is 224.0.0.1.
Default Setting
The default address is 224.0.0.1
Command Mode
Interface Config
- 480 -