Care And Cleaning - Sunbeam PB9800 Instruction/Recipe Booklet

Care and Cleaning

Note: Ensure that the blender is unplugged
from the power outlet prior to cleaning.
Washing
For best results, wash all blender
components, excluding the base (motor
housing), in hot soapy water.
The DURALITE™ blending jug and lid
(excluding the measuring cap) can be washed
in the dishwasher. It is recommended to
remove the blade assembly from the jug as
this part is not dishwasher safe.
Quick clean
Half fill the blender with lukewarm water and
a small amount of detergent. Position the jug
on the motor base and press the 'Pre-Clean'
function button. When the task is completed,
the motor will stop and all function buttons
will illuminate. Now remove the jug, rinse it
under running water and then allow to air dry.
Thorough cleaning
After completing the quick clean, should
any ingredients remain, remove the blade
assembly and wash both the jug and blade
assembly in warm soapy water. Rinse well
and dry. Rinse the lid, ingredient cap and
processing baton under running water and
wash with warm soapy water. Rinse well and
dry.
To clean the motor base
Use a damp, soft sponge with mild detergent
and wipe over the motor base.
Note: Never immerse the motor base in water
or other liquid.
13