Assembling Your Sunbeam Pure Juice - Sunbeam Pure Juice JE4700 Instruction Booklet

Assembling your Sunbeam
Pure Juice
Before Use:
After unpacking your Pure Juice, we
recommend that you dissemble the unit
before using for the first time. Wash all parts
except the Motor Base in hot soapy water.
Rinse and dry immediately.
Important:
Always ensure your Pure Juice is unplugged
from the power outlet when not in use,
assembling or removing parts.
To assemble your Pure Juice
(See opposite)
1. S et up the Motor Base on a dry level
surface with the On/Off switch facing the
user.
2. P lace the Juice Collector onto the Motor
Base.
3. P osition the stainless steel grating and
filtering basket on to the drive shaft.
4. P lace the Lid/Feed Tube on top of the
Pure Juice and secure by clipping the two
safety levers on the sides of the juicer into
position.
Note: As an added safety feature the Pure
Juice will not operate if the safety levers are
not locked in place.
5. P osition the Pulp container in place.
6 Plug the Pure Juice into the 230-240V
power outlet and turn on Power. Position
a glass or jug under the Juice outlet and
commence juicing.
Continuous
Flow Pulp
Container
4
Food Pusher
Lid/Feed Tube
Stainless steel
grating and
filtering basket
Juice Collector /
Outlet
Drive Shaft
Motor Base
On/Off Control
Button
Safety Lever