System Manageip - Fortinet Version 3.0 Administration Manual

config CLI commands

system manageip

Configure the FortiBridge management IP address. Use the management IP address for management
access to the FortiBridge unit.
Command syntax pattern
config system manageip
set <keyword> <variable>
end
config system manageip
unset <keyword>
end
get system manageip
show system manageip
Keywords and variables
ip <address_ipv4mask>
Example
This example shows how to set the management IP address to 192.168.2.80 and the netmask to
255.255.255.0.
config system manageip
set ip 192.168.2.80 255.255.255.0
end
This example shows how to display the settings for the manageip command.
get system manageip
This example shows how to display the configuration for the manageip command.
show system manageip
Related Commands
• system interface {internal | external}
FortiBridge Version 3.0 Administration Guide
09-30000-0163-20061109
Description
Set the IP address and netmask of the FortiBridge
management interface.
system manageip
Default
192.168.1.99
255.255.255.0
69