Alertemail Setting - Fortinet Version 3.0 Administration Manual

alertemail setting

alertemail setting
Use this command to configure the FortiBridge unit to send alert email to up to three recipients when
action on failure is set to send a alert email message.
Command syntax pattern
config alertemail setting
end
config alertemail setting
get alertemail setting
show alertemail setting
Keywords and variables
authenticate
{disable | enable}
mailto1
<email-address_str>
mailto2
<email-address_str>
mailto3
<email-address_str>
password
<password_str>
server
{<name_str> |
<address_ipv4>}
username
<user-name_str>
Examples
This example shows how to configure the SMTP server and user name and password, enable
authentication and add two email addresses.
config alertemail setting
end
This example shows how to display the alertemail settings.
get alertemail setting
This example shows how to display the configuration of the alertemail setting command.
show alertemail setting
52
set <keyword> <variable>
unset <keyword>
Description
Enable SMTP authentication if the FortiBridge unit is required to
authenticate to connect to the SMTP server.
Enter an email address. This is one of the email addresses to which
the FortiBridge unit sends alert email.
Enter an email address. This is one of the email addresses to which
the FortiBridge unit sends alert email.
Enter an email address. This is one of the email addresses to which
the FortiBridge unit sends alert email.
Enter the password that the FortiBridge unit needs to access the
SMTP server.
Enter the name of the SMTP server, in the format
smtp.domain.com, to which the FortiBridge unit should send
email. The SMTP server can be located on any network connected
to the FortiBridge unit.
Enter a valid email address in the format user@domain.com. This
address appears in the From header of the alert email.
set server mail.ourcompany.com
set username fortigate@ourcompany.com
set authenticate enable
set password pwd23
set mailto1 admin1@ourcompany.com
set mailto2 admin2@ourcompany.com
config CLI commands
FortiBridge Version 3.0 Administration Guide
09-30000-0163-20061109
Default
disable
No
default.
No
default.
No
default.
No
default.
No
default.
No
default.