Appliance Setup
Appliance Setup
This document describes how to setup the FSM-500G appliance.
Fresh Installation
l
Factory Reset
l
Upgrading FortiSIEM Collector
l
Appliance Re-image
l
Fresh Installation
Step 1: Rack mount the FSM-500G Appliance
l
Step 2: Power On the FSM-500G Appliance
l
Step 3: Verify System Information
l
Step 4: Configure FortiSIEM via GUI
l
Step 5: Register Collectors
l
Step 6: Using FortiSIEM
l
Step 1: Rack mount the FSM-500G Appliance
1. Follow
FortiSIEM 500G QuickStart Guide
2. Connect FSM-500G to the network by connecting an Ethernet cable to Port1.
Step 2: Power On the FSM-500G Appliance
1. Make sure the FSM-500G device is connected to a Power outlet and an Ethernet cable is connected to
Port1.
2. Power On the FSM-500G device.
Step 3: Verify System Information
1. Connect to the FSM-500G appliance using VGA port or Console port.
2. Login as user root with password ProspectHills.
3. You will be asked to change your password. Once you change the password, you will be logged out. Login
again with your new password.
FortiSIEM 7.0.1 500G Collector Configuration Guide
Fortinet Inc.
to mount FSM-500G into rack.
Before proceeding to the next step, connecting Ethernet cable to Port1 is required for
Network configuration.
4