Factory Default Fortigate Configuration Settings; Factory Default Nat/Route Mode Network Configuration - Fortinet FortiGate FortiGate-800 Installation And Configuration Manual

Factory default FortiGate configuration settings

Factory default FortiGate configuration settings

Factory default NAT/Route mode network configuration

30
The FortiGate unit is shipped with a factory default configuration. The default
configuration allows you to connect to and use the FortiGate web-based manager to
configure the FortiGate unit onto the network. To configure the FortiGate unit onto the
network you add an administrator password, change network interface IP addresses,
add DNS server IP addresses, and configure routing, if required.
If you plan to operate the FortiGate unit in Transparent mode, you can switch to
Transparent mode from the factory default configuration and then configure the
FortiGate unit onto the network in Transparent mode.
Once the network configuration is complete, you can perform additional configuration
tasks such as setting system time, configuring virus and attack definition updates, and
registering the FortiGate unit.
The factory default firewall configuration includes a single network address translation
(NAT) policy that allows users on your internal network to connect to the external
network, and stops users on the external network from connecting to the internal
network. You can add more policies to provide more control of the network traffic
passing through the FortiGate unit.
The factory default content profiles can be used to apply different levels of antivirus
protection, web content filtering, and email filtering to the network traffic that is
controlled by firewall policies.
• Factory default NAT/Route mode network configuration
• Factory default Transparent mode network configuration
• Factory default firewall configuration
• Factory default content profiles
When the FortiGate unit is first powered on, it is running in NAT/Route mode and has
the basic network configuration listed in
connect to the FortiGate unit web-based manager and establish the configuration
required to connect the FortiGate unit to the network. In
access means you can connect to the web-based manager using this interface. Ping
management access means this interface responds to ping requests.
Table 2: Factory default NAT/Route mode network configuration
Administrator
account
Internal interface
Table
User name:
Password:
IP:
Netmask:
Management Access:
2. This configuration allows you to
Table 2 HTTPS management
admin
(none)
192.168.1.99
255.255.255.0
HTTPS, Ping
Getting started
Fortinet Inc.