Adding Custom Icmp Services; Adding Custom Ip Services; Grouping Services - Fortinet FortiGate FortiGate-800 Installation And Configuration Manual

Services

Adding custom ICMP services

Adding custom IP services

Grouping services

204
Add a custom ICMP service if you need to create a policy for a service that is not in
the predefined service list.
To add a custom ICMP service
1 Go to Firewall > Service > Custom.
2 Select ICMP from the Protocol list.
3 Select New.
4 Type a Name for the new custom ICMP service. This name appears in the service list
used when you add a policy.
The name can contain numbers (0-9), uppercase and lowercase letters (A-Z, a-z), and
the special characters - and _. Other special characters and spaces are not allowed.
5 Specify the ICMP type and code for the service.
6 Select OK to add the custom service.
You can now add this custom service to a policy.
Add a custom IP service if you need to create a policy for a service that is not in the
predefined service list.
To add a custom IP service
1 Go to Firewall > Service > Custom.
2 Select IP from the Protocol list.
3 Select New.
4 Type a Name for the new custom IP service. This name appears in the service list
used when you add a policy.
The name can contain numbers (0-9), uppercase and lowercase letters (A-Z, a-z), and
the special characters - and _. Other special characters and spaces are not allowed.
5 Specify the IP protocol number for the service.
6 Select OK to add the custom service.
You can now add this custom service to a policy.
To make it easier to add policies, you can create groups of services and then add one
policy to provide or block access for all the services in the group. A service group can
contain predefined services and custom services in any combination. You cannot add
service groups to another service group.
To group services
1 Go to Firewall > Service > Group.
2 Select New.
Firewall configuration
Fortinet Inc.