Speco D4RS User Manual page 24

RESOLUTION Select D1, Half D1 or CIF using the mouse or the control button on the remote
control.
FRAME RATE Set the frame rate for the specified channel. The sum of the frame rate values from
each channel cannot exceed the maximum frame rates for a specific recording
resolution.
QUALITY Select the recording quality for the selected channel. Options are;
Level 1 (Low), Level 2, Level 3, Level 4, and Level 5 (High)
Assign the recording mode for the selected channel. Options are: Continuous,
RECORDING
Motion, Schedule or Disable.
MODE
SENSOR Select the sensor setting for the selected channel.
RECORDING
PRE RECORD Enable/disable pre-event recording. Pre-event recording time is up to 20 minutes.
POST EVENT Set the post event recording time duration for the specified channel.
(10~30 seconds)
RECORD
AUDIO Enable/disable audio recording for the specified channel.
SCHEDULE Set the recording schedule.
Set the recording by EZRecord feature.
EZRECORD
The EZRECORD has high priority than other setting values on RECORD.
User can change the setting value such as resolution, frame rate, quality and
recording type. By the setting value, the DAYS TO RECORD will change
accordingly.
24